Products

The Bently Nevada 330101-00-35-10-11-05 is a non-contact eddy-current proximity probe from the 3300 XL 8 mm series, manufactured by Baker Hughes (Bently Nevada). Its core function is to measure shaft vibration and axial position on critical rotating machinery, such as turbines and compressors. It delivers a voltage output proportional to the gap between the probe tip and a conductive target surface, enabling both static (position) and dynamic (vibration) measurements.

The Honeywell JKM-TC810N1013C is an output control module for Honeywell's addressable fire alarm control panel systems. It provides a supervised output point for controlling notification appliances or other field devices, and communicates with the fire alarm control panel over the signaling line circuit (SLC) for intelligent addressable operation. The "JKM" prefix may indicate a specific product line, regional variant, or kit designation.

The Allen-Bradley 100-C60*00 is a 3-pole IEC-rated contactor from Rockwell Automation's Bulletin 100-C series . Designed to control motors and other loads in industrial automation applications, this compact contactor combines high switching power with space-saving design. The "C60" designation indicates a 60A AC-3 current rating and 32kW switching power at 400V, making it suitable for controlling medium-sized motors up to 40 HP at 460V . The asterisk (*) in the model number indicates the coil voltage variant, with options available for both AC and DC control voltages.

The Allen‑Bradley 700‑HLT12Z24 is a high‑density terminal block relay from the Bulletin 700‑HL series, designed for interposing and isolation applications in industrial control systems. This electromechanical relay features a 10‑amp DPDT (2 Form C) contact configuration and a 24V DC coil, packaged in a slim 6.2 mm per‑pole housing that saves valuable panel space . The 700‑HL series is engineered for applications requiring reliable signal switching between controllers (PLCs, DCS) and field devices such as solenoids, contactors, indicators, and sensors. The screw‑terminal base ensures secure wiring, while the built‑in retainer clip and snap‑in marker lever simplify installation and identification.

The Schneider ATV930C31N4C is an Altivar Process 930 variable frequency drive for three-phase asynchronous and synchronous motors. Based on the Schneider naming convention, "ATV930" indicates the Altivar Process 930 range, "C31" identifies the power rating (approximately 315 kW), and "N4C" indicates the 400 V class, integrated EMC filter, and cabinet-mount configuration. It provides variable speed control for heavy-duty process applications in water and wastewater, oil and gas, mining, and other industries.

The Schneider XKBA11330 is a complete joystick controller designed for industrial control applications. Based on the Schneider/Telemecanique naming convention, the "XKBA" prefix indicates a joystick controller within the Harmony series, and "11330" identifies the specific configuration, including the number of axes and handle type. It provides manual directional control for machinery, cranes, and other motion applications, typically mounted in a control panel or console.

The GM International D1020D is a dual-channel, SIL 2 certified powered isolating driver designed for DIN-rail mounting. It isolates and transfers a 4-20 mA or 0-20 mA signal from a controller located in a Safe Area to a load of up to 750 Ω in a Hazardous Area, while supporting bidirectional HART communication for smart valve positioners and I/P converters.

The Yokogawa CP451-10 S2 is a high-performance processor module for the Field Control Station (FCS) of the CENTUM VP and CENTUM CS 3000 distributed control systems (DCS). It serves as the core computing unit that executes continuous regulatory control, sequence logic, batch processes, alarm management, and communication with operator stations and I/O modules. The S2 suffix denotes the Style 2 hardware revision, confirming compatibility with the CENTUM VP platform.

The Yokogawa MRI-234*B is a 32-point relay contact input board featuring normally closed contact outputs, designed for use with legacy Yokogawa CENTUM I/O assemblies and distributed control systems (DCS).

The Yokogawa TE16*B is a 16-point terminal block used to physically terminate field wiring for input signals in Yokogawa's CENTUM VP/CS and ProSafe-RS control systems. It acts as the passive interface between field instruments (sensors, switches, transmitters) and the system's I/O modules.

The Yokogawa AIP502 is a V-Net Coupler Module designed for Yokogawa's CENTUM CS and CENTUM VP distributed control systems (DCS). It serves as the communication interface between various components within the V-Net control network, enabling high-speed data exchange between Field Control Units (FCUs), operator stations, and other DCS devices.