Products

The MOXA 45MR-1601 is a digital input module from the ioThinx 4500 Series, designed for modular and scalable industrial automation systems. Its core function is to provide 16 channels of 24 VDC digital input (NPN type) to connect field devices such as sensors, switches, and pushbuttons, making it a key component for remote monitoring and control in IIoT and edge computing applications.

The PROSOFT MVI94-ADM is a high-performance serial communication module designed by ProSoft Technology for the Rockwell Automation Flex I/O platform. Its core function is to serve as a communication bridge between the Flex I/O backplane and various serial field devices—such as barcode scanners, legacy ASCII devices, terminals, and more. Through its C-programmable feature, it enables flexible support for multiple serial protocols (ASCII, RS-232/422/485) and custom data exchange.

The PROSOFT MVI56-MNET is a high-performance network gateway module designed by ProSoft Technology for the Rockwell Automation ControlLogix platform. Its core function is to seamlessly connect ControlLogix processors to third-party devices that support the Modbus TCP/IP protocol—such as variable frequency drives, smart instruments, and SCADA systems—enabling efficient data exchange between industrial field buses and upper-level information networks via standard Ethernet interfaces.

The Yokogawa ADV151-P60 is a high-density digital input module designed for Yokogawa's CENTUM VP and CS3000 DCS (Distributed Control System). Its core function is to receive 32 channels of 24V DC digital signals from field devices—such as limit switches, pushbuttons, and proximity sensors—and convert them into logic status signals for the process controller.

The Bachmann DIO248 (00019116-00) is a high-density, multifunctional digital I/O module designed for the Bachmann M1 controller system. Its core function is to control digital field devices—such as contactors, relays, pneumatic and hydraulic valves—while simultaneously reading signals from digital sensors, detectors, or switches. It also integrates high-speed counter and interrupt functions, making it suitable for complex industrial applications requiring fast response and position detection.

The Pepperl+Fuchs HiD2900TOP is a versatile 2-channel terminal module designed for the pass-through of non-intrinsically safe signals between the control system and field devices. It mounts on a HiD Termination Board and supports universal signal types, accommodating both 0/4 ... 20 mA and 0 ... 5 V signals. Each channel can be independently configured via DIP switches for either signal pass-through or signal conversion. The module features a built-in 250 Ω resistor that can be enabled through the DIP switches, allowing the conversion of a 0/4 ... 20 mA signal to a 0 ... 5 V or 1 ... 5 V signal for control side compatibility

The Pepperl+Fuchs KFD2-SR2-EX1.W.LB is a single-channel isolated barrier (switch amplifier) designed by Pepperl+Fuchs. Its core function is to isolate and convert signals from NAMUR sensors or dry contacts located in hazardous areas (such as environments with flammable gases or dusts) into relay contact outputs for safe-area control systems. It also provides line fault detection (LFD) functionality to ensure the integrity of intrinsically safe explosion protection systems.

The B&R X20DO8332 is a high-performance digital output module for the B&R X20 system. Its core function is to convert the control signals from the automation system into high-current outputs (up to 2A per channel) to directly drive actuators, valves, relays, and other field devices in industrial applications.

The B&R X20CP1584 is a high-performance CPU module for the B&R X20 system, powered by an Intel Atom™ processor clocked at 0.6 GHz and equipped with 256 MB DDR2 SDRAM. Its core function is to serve as the central processing unit for automation tasks, providing both standard and real-time communication interfaces to control complex machinery and processes.

The B&R X20AI2622 is a high-precision analog input module for the B&R X20 system. Its core function is to convert analog signals from field sensors—such as pressure, temperature, or flow transmitters—into digital values that the automation system can process, supporting both voltage and current signal types.

The B&R X20AT2222 is a dedicated analog input module for the B&R X20 system, specifically designed for resistance temperature measurement. Its core function is to convert signals from Pt100 or Pt1000 resistance temperature detectors (RTDs) into digital temperature values that the automation system can process, supporting 2- or 3-wire sensor connections for precise temperature monitoring.

The EL3048 analog input terminal processes signals in the range between 0 and 20 mA. The current is digitized to a resolution of 12 bits and is transmitted (electrically isolated) to the higher-level automation device. The EL3048 EtherCAT Terminal combines eight channels in one housing. The power contacts are connected through. The 0 V power contact is used as reference ground connection for the inputs. The signal state of the EtherCAT Terminal is indicated by light emitting diodes.