Products

The EK1100 EtherCAT Coupler is the link between the EtherCAT protocol at fieldbus level and the EtherCAT Terminals. The coupler converts the passing telegrams from Ethernet 100BASE-TX to E-bus signal representation. A station consists of a coupler and any number of EtherCAT Terminals that are automatically detected and individually displayed in the process image.

The EL2535-0002 output terminals are specially designed for the precise control of single and double-coil proportional valves and proportional solenoid valves. They regulate the output current through pulse width modulation (PWM) of the supply voltage and are electrically isolated from the E-bus. The current values (0 to maximum output current) are specified by the automation device through a 16-bit value. The output stages are protected against overload and short circuit. Each EtherCAT pulse width current terminal contains two channels whose signal state is indicated by LEDs. The light emitting diodes simplify local diagnosis by displaying typical load and wiring faults.

The Beckhoff EL9011 is a passive EtherCAT Terminal designed to function as a physical termination for the E‑bus at the end of a modular I/O station. Its core function is to cover the exposed E‑bus contacts on the last terminal, protecting them from contamination and preventing communication errors. Its use is mandatory for every EK1100 EtherCAT station, ensuring reliable operation of the communication bus.

The Emerson 5X00085G01 is a media converter chassis mounting kit (MTG Kit) for the Emerson Ovation distributed control system. Its core function is to provide a physical chassis housing for media converter modules, enabling seamless conversion between different media types—such as copper to fiber optic—to extend network communication distances and integrate various field devices in an Ovation-based control network.

The Emerson Ovation 5X00059G01 is a HART-enabled analog input module designed for the Emerson Ovation Distributed Control System (DCS). Its core function is to convert analog signals—such as 4–20 mA from transmitters—into digital data for process monitoring and control, while the integrated HART protocol enables bidirectional communication with smart field devices for diagnostics and configuration.

The Bently Nevada 3500/42M 176449-02 is a four-channel Proximitor*/Seismic Monitor from the renowned 3500 Series Machinery Protection System. Its core function is to continuously monitor the vibration and position of critical rotating machinery, such as turbines, compressors, and generators. It achieves this by accepting inputs from proximity and seismic transducers, conditioning the signals, and comparing them against user-programmable alarms to provide essential protection and status information to operators.

The Bently Nevada 3500/40M 176449-01 is a four-channel Proximitor Monitor from the 3500 Series Machinery Protection System . Its core function is to receive signals from Bently Nevada proximity transducers, condition them to provide essential vibration and position measurements, and compare these against user-programmable alarms to protect critical rotating machinery.

The Bently Nevada 3500/33 16-Channel Relay Module is a full-height output module for the 3500 Series Machinery Protection System. Its core function is to provide 16 independent relay outputs that translate alarm conditions from monitor modules into actionable control signals—such as triggering alarms, activating shutdown sequences, or controlling external equipment.

The Bently Nevada 3500/32M 149986-02 is a full-height, 4-channel relay control module from the 3500 Series Machinery Protection System. Its core function is to serve as the primary interface between the monitoring system and external control elements. It receives alarm and status signals from other monitor modules, processes them through programmable voting logic, and drives its four independent relay outputs to initiate critical actions such as automated shutdowns, alarms, or process interlocks.

The Bently Nevada 3500/15 106M1079-01 is a universal AC power supply module for the 3500 Series Machinery Protection System . Its core function is to convert a wide range of AC input voltages into the regulated DC voltages required to power all other modules within the 3500 rack, ensuring continuous operation of critical machinery monitoring systems.

The Bently Nevada 3500/20 Rack Interface Module (RIM) is the primary communication hub for the 3500 Series Machinery Protection System . Its core function is to serve as the main interface between the 3500 rack and the outside world, enabling configuration, data retrieval, and communication with host software while providing essential system-level control functions.

The Honeywell FC-TSAI-1620M is a high-density, high-reliability analog input module designed primarily for the Honeywell Experion PKS (Process Knowledge System) Distributed Control System (DCS) and Safety Manager platforms. Its core function is to convert analog field signals (e.g., 4–20 mA or 1–5 V DC) from transmitters and sensors, such as those for temperature, pressure, and flow, into digital values that the control system can process.   We currently offer 100% new and original modules in stock, supporting fast global delivery within 3-5 days, backed by a comprehensive 1-year warranty to keep your projects running smoothly with a highly competitive edge.