Products

The Yokogawa PW482-10 is a dedicated AC input power supply module for the CENTUM VP and CENTUM CS 3000 distributed control systems (DCS). It converts 220–240 VAC plant power into the stabilized DC voltages required by the Field Control Station (FCS) backplane and its associated I/O modules . It is installed in dedicated power supply slots within compatible node units and supports dual-redundant configuration for high availability.

The Yokogawa RB301 is a RIO Bus Interface Master Card designed for Yokogawa's CENTUM VP and CENTUM CS distributed control systems (DCS). It serves as the communication bridge between a host controller (such as a PC or Field Control Unit) and Remote I/O (RIO) devices, enabling high-speed data exchange across distributed process control architectures.

The Yokogawa PW402 is a power supply module designed for the CENTUM VP and CENTUM CS 3000 distributed control systems (DCS). It is installed in a dedicated power supply nest within the Field Control Station (FCS) and converts AC line voltage into the stable DC power required by the system's CPU, communication bus, and I/O modules. The module supports dual-redundant configuration, ensuring continuous operation even if one unit fails.

The Yokogawa CP345 is a processor board module for the CENTUM CS 3000 / VP distributed control system (DCS). It serves as the core computing engine for the Field Control Station (FCS), executing control logic, managing data processing, and coordinating communication within the control network.

The Yokogawa AMN11 is not an active electronic I/O module itself, but rather a passive nest (rack/chassis) used to house and interconnect analog I/O modules within Yokogawa's CENTUM CS/VP distributed control systems (DCS), specifically in Remote I/O (RIO) or Field Control Station (FCS) architectures.

The Yokogawa RB401 is a Remote I/O (RIO) Bus Interface Module designed for Yokogawa's CENTUM VP and CENTUM CS 3000 distributed control systems (DCS). It serves as the communication bridge between field-mounted RIO stations and the central control units, enabling high-speed data transmission across distributed process control architectures.

The Yokogawa VF702 is a Control Bus Interface Card designed to connect a computer (PCI Express host) to Yokogawa's proprietary V-net control bus. It enables the host to function as a node within the V-net network, and is commonly used in Yokogawa's CENTUM series distributed control systems (DCS), including CENTUM VP and CENTUM CS 3000 architectures . The card provides dual-channel redundancy with two independent BNC ports (BUS 1 and BUS 2), and is backward compatible with the older VF701 card, allowing mixed operation on the same V-net segment.

The Yokogawa AIP512 is a Remote I/O (RIO) Bus Connection Module designed for Yokogawa's CENTUM CS 3000 and CENTUM VP Field Control Systems (FCS). It serves as the critical interface between the Field Control Unit (FCU) and remote I/O devices, enabling distributed I/O architectures in process industries such as refining, petrochemicals, and power generation.

The Yokogawa PW302 is a power supply module designed for Yokogawa's distributed control systems (DCS), specifically the CENTUM CS and CENTUM CS 3000 series. It is typically installed in Remote I/O (RIO) nodes or local bus nodes to provide stabilized DC power to the nested I/O modules and communication interfaces within the rack.

The Yokogawa ADM51T is a 16-point Contact Output Module (Terminal Type) for the CENTUM CS 3000, CENTUM CS 1000, and CENTUM VP distributed control systems (DCS) . It is a digital output module designed to switch binary field devices such as relays, solenoids, and indicator lamps, using transistor contact outputs rather than electromechanical relays.

The Yokogawa ADM12T is a 32-point contact input module with terminal-type connections for the CENTUM CS, CENTUM CS 3000, and CENTUM VP distributed control systems (DCS). It is a digital input module designed to acquire binary status signals from field devices such as limit switches, pushbuttons, and relay contacts. The "T" suffix denotes the terminal-type interface, which uses M4 screw terminals for direct field wiring, as opposed to the connector-type variants (ADM12C) that require external terminal boards.

The Yokogawa ADM11T is a 16-point Contact Input Module (Terminal Type) for the CENTUM CS 3000, CENTUM CS 1000, and CENTUM VP distributed control systems (DCS). It is a digital input module designed to acquire binary status signals from field devices such as limit switches, pushbuttons, and relay contacts, and is part of the RIO (Remote I/O) system.