Products

The ProSoft MVI56-DFCM is a DF1 Master/Slave serial communication module for the Rockwell Automation ControlLogix platform. It enables seamless integration between ControlLogix processors and DF1-compatible devices, allowing the system to act as a SCADA sub‑master or slave on a DF1 network.

The ProSoft MVI56-DH485 is a DH-485 communication module for the Rockwell Automation ControlLogix platform. It provides a high-speed interface between ControlLogix processors and DH-485 networks, allowing seamless integration with legacy Rockwell Automation PLCs (such as SLC 5/03) and other DH-485 compatible end devices.

The ProSoft MVI56-GSC is a Generic ASCII Serial Communication Module for the Rockwell Automation ControlLogix platform. It adds two fully configurable serial ports that enable the ControlLogix processor to communicate with ASCII-based devices such as barcode scanners, weigh scales, printers, and legacy serial instruments—without consuming the processor's front port or valuable processing time.

The ProSoft MVI56-MCM is a Modbus Master/Slave communication module for the Rockwell Automation ControlLogix platform. It acts as a gateway between the ControlLogix backplane and Modbus-compatible devices, enabling seamless data exchange with instruments, drives, and SCADA systems.

The Pepperl+Fuchs S1SL-2AI-2C is a 2-channel passive isolator for analog current signals in industrial automation. It is loop-powered and transfers 0/4 ... 20 mA signals from the field side to the control side with galvanic isolation. With 0.1% accuracy, 6.2 mm ultra-slim housing, and ATEX/IECEx Zone 2 certification, this device provides a reliable, space-saving solution for isolating current signals in applications where an external power supply is unavailable or undesirable.

The Pepperl+Fuchs S1SD-1TI-1U is a 1-channel temperature signal conditioner designed for isolating and converting analog temperature signals from the field to a control system. It accepts inputs from a wide variety of sensors, including thermocouples, RTDs, potentiometers, and millivolt sources, and provides a standard current or voltage output..

The Bently Nevada 133388-02 is the Tachometer Module for the 3500/50 in the 3500 Series Machinery Protection System. This dual-channel module is engineered for precise speed monitoring of rotating machinery, measuring shaft rotational speed, rotor acceleration, and direction.

The Bently Nevada 330105-02-12-05-12-05 is a reverse-mount proximity probe from the industry-standard 3300 XL 8 mm eddy current transducer system. Designed for non-contact vibration and position measurement, this probe is engineered to monitor critical rotating machinery such as steam turbines, compressors, and fans.

The Bently Nevada 190501-00-00-00 is a specialized Velomitor CT piezoelectric velocity transducer designed for low-frequency casing vibration measurement on slow-speed rotating machinery.

The Honeywell CC-PSP401 51454122-175 is a dedicated Speed Protection Module (SPM) engineered for the Experion PKS Series-C control system. It provides high-integrity speed monitoring and overspeed trip execution for critical rotating machinery such as turbines, compressors, and pumps.

The Yaskawa CIMR-G5U43P7 is a versatile 5 HP variable frequency drive from the trusted Varispeed 616G5 series. Designed for general-purpose industrial applications, it provides reliable and precise speed control for three-phase AC motors. Operating on a 380–460 VAC input, this drive offers a wide output frequency range of 0 to 400 Hz, making it a flexible solution for various motor control tasks in demanding environments.

The Yaskawa USAGED-30L22K is a high-performance 30kW AC servo motor engineered for demanding industrial automation applications. Part of Yaskawa's renowned servo family, this model delivers high torque output, exceptional stability, and reliable operation in harsh environments. It is designed as a direct-fit solution for heavy-duty machinery, offering seamless integration with compatible Yaskawa servo drives.