The Pepperl+Fuchs S1SD-1TI-1U is a 1-channel temperature signal conditioner designed for isolating and converting analog temperature signals from the field to a control system. It accepts inputs from a wide variety of sensors, including thermocouples, RTDs, potentiometers, and millivolt sources, and provides a standard current or voltage output..
Item No :
S1SD-1TI-1UOrder(MOQ) :
1 PiecePayment :
EXWProduct Origin :
GermanyShipping Port :
WuhanLead Time :
3-5daysWeight :
2KG| Attribute | Specification |
|---|---|
| Manufacturer | Pepperl+Fuchs |
| Product Type | 1-Channel Temperature Converter / Signal Conditioner |
| Input Types | Thermocouples (Types B, E, J, K, N, S, T, L, U, C, D); RTDs (Pt100, Pt200, Pt500, Pt1000, Ni100, Ni200, Ni500, Ni1000); PTC thermistors (KT, KTY, ST); Potentiometers (0.2 ... 50 kΩ); Resistors (0 ... 5 kΩ); Voltage (-100 ... 100 mV, -1000 ... 1000 mV) |
| RTD Wiring | 2-, 3-, or 4-wire connection |
| Output Signals | Configurable: 0/1 ... 5 V, 0/2 ... 10 V (load ≥ 2 kΩ); 0/2 ... 10 mA, 0/4 ... 20 mA (load ≤ 600 Ω) |
| Supply Voltage | 16.8 ... 31.2 V DC |
| Accuracy | ≤ 0.1 % of full-scale value |
| Response Time | ≤ 300 ms |
| Configuration | DIP switches or PACTware software |
| Galvanic Isolation | Reinforced insulation (300 Veff, test voltage 3 kV) between input, output, and power supply |
| Operating Temperature | -25 ... 70 °C (-13 ... 158 °F) |
| MTBF | 353 years (acc. to SN 29500) |
| Connection | Screw terminals (0.5 ... 2.5 mm² / 20 ... 14 AWG) |
The S1SD-1TI-1U is part of Pepperl+Fuchs' signal conditioning portfolio. Below are related products often used in conjunction with it or as alternatives.
| Model / Part Number | Product Type | Application / Notes |
|---|---|---|
| S1SD-1TI-1U | 1-Channel Temp. Converter | Target model; universal analog input, current/voltage output, DIP-switch configurable. |
| S1SD-2PF | Power Supply Module | Used to provide power to multiple S1SD-series modules via the Power Bus system. |
| POWERBUS-SETHS* | Power Bus Kit | A set of components for creating a power bus rail, simplifying wiring for multiple modules. |
| S-ADP-USB | Programming Adapter | Interface for connecting the S1SD module to a PC for configuration via PACTware software. |
Q1: How is the S1SD-1TI-1U configured?
Configuration is done either through DIP switches on the side of the device for basic settings or via PACTware software for full flexibility and a wider range of sensor selection.
Q2: What is Line Fault Detection (LFD)?
LFD is a diagnostic feature that continuously monitors the sensor circuit for faults such as a broken wire, a short circuit, or sensor burnout. It signals a fault, allowing for prompt maintenance and preventing erroneous measurements.
Q3: Does this module provide electrical isolation?
Yes, it features reinforced galvanic isolation between the input, output, and power supply circuits. This protects the control system from voltage spikes and interference from the field side.
Q4: What output signals does the module provide?
The module can be configured to output standard analog signals, including 0/4...20 mA current loops or 0/1...5 V and 0/2...10 V voltage signals.
The YOKOGAWA AAV142 is a 16-channel analog input module for the CENTUM VP / CS 3000 distributed control system, featuring a -10 to +10 V DC input range and non-isolated channel design.
The YOKOGAWA AAV141 is an analog input module for the CENTUM series distributed control system (FIO). It is a 16-channel, non-isolated module.
The Pepperl+Fuchs NJ20+U10+E2-Y111572 is an inductive proximity sensor from the Comfort series, featuring a 20 mm flush-mountable sensing range and a PNP normally-open output.
The Pepperl+Fuchs RL28-55-V-3974/47/82b/112 is a retroreflective photoelectric sensor with a polarization filter and foreground suppression, designed for detecting shrink-wrapped objects and other challenging targets.
The Pepperl+Fuchs UB200-12GM-I-V1 is a single-head ultrasonic sensor with a 4–20 mA analog output, designed for precise non-contact distance measurement over a short range.
The Pepperl+Fuchs VAA-4E4A-KE-ZEJQ/E2L is an AS-Interface sensor/actuator module for switch cabinet (KE) mounting, featuring 4 digital inputs and 4 electronic outputs with removable, color-coded terminals.
The Pepperl+Fuchs VAA-4E4A-KE-ZE/E2 is an AS-Interface sensor/actuator module for switch cabinet mounting, featuring 4 digital inputs and 4 electronic outputs with removable, color-coded terminals.
The Pepperl+Fuchs VAZ-FK-R-YE is an AS-Interface flat cable (bulk cable, 100 m) with a yellow TPE sheath, designed for cable piercing technique and suitable for drag chain applications.
Scan to Wechat :
Scan to WhatsApp :
