Products

The Bently Nevada 3500/20-01-01-00 is a standard Rack Interface Module (RIM) for the 3500 series machinery protection system. It serves as the primary communication interface for rack configuration, data retrieval, and integration with external monitoring software. The complete configuration consists of two key components: the 125744-02 Standard Rack Interface Module (main card) and the 135031-01 RIM I/O Module with built-in modem interface.

The Bently Nevada 3500/15-05-00-00 is a Universal AC Power Supply module for the 3500 series machinery protection system. The 106M1079-01 power supply module (main card) and the 106M1081-01 power input module (PIM). This configuration is a single-supply setup (upper slot only, lower slot empty) that provides the entire 3500 rack with regulated DC power. 

The Bently Nevada 3500/15-05-00-00 is a Universal AC Power Supply module for the 3500 series machinery protection system. The 106M1079-01 power supply module (main card) and the 106M1081-01 power input module (PIM). This configuration is a single-supply setup (upper slot only, lower slot empty) that provides the entire 3500 rack with regulated DC power. 

The Bently Nevada 127610-01+125840-01 is a dual high-voltage AC power supply module designed for the 3500 Series Machinery Protection System. It is a half-height module that provides regulated power to all monitoring modules installed in the 3500 rack, ensuring continuous operation of critical rotating machinery protection systems.

The ProSoft PLX31-EIP-MBTCP is a stand-alone DIN-rail mounted communication gateway that enables high-speed bi-directional data transfers between EtherNet/IP and Modbus TCP/IP networks. It allows Rockwell Automation controllers (ControlLogix, CompactLogix, PLC-5, SLC) to communicate seamlessly with Modbus TCP/IP devices and vice versa, eliminating the need for complex custom programming.

The ProSoft ILX56-PBM is a PROFIBUS DPV1 Master/Multi-Slave communication module designed for Rockwell Automation ControlLogix platforms. It allows ControlLogix processors to communicate with various PLCs and devices using the PROFIBUS DP protocol.

The ProSoft MVI56E-MNETR is a Modbus TCP/IP Client/Server Enhanced Communication Module for Rockwell Automation ControlLogix platforms, specifically designed with a Reduced Data Block for optimal performance in remote rack applications using ControlNet or EtherNet/IP networks.

The ProSoft MVI56E-MNETC is an Enhanced Modbus TCP/IP Multi-Client/Server Communication Module for Rockwell Automation ControlLogix platforms. It enables the ControlLogix processor to communicate with multiple Modbus TCP/IP server devices.  

The ProSoft MVI56E-MCM is an Enhanced Modbus Master/Slave Communication Module for Rockwell Automation ControlLogix platforms. It acts as an in-chassis I/O module on the ControlLogix backplane, allowing the processor to communicate with Modbus RTU/ASCII serial devices as if they were standard I/O.  

The Allen-Bradley 1794-OE4 is a 4-channel analog output module for the FLEX I/O system.  It provides 4 single-ended, non-isolated outputs with software-selectable voltage (±10V, 0–10V) or current (0–20 mA, 4–20 mA) ranges, offering 12-bit plus sign resolution and 1.024 ms conversion rate for all channels.

The Allen-Bradley 1794-IRT8 is an 8-channel thermocouple, RTD, and millivolt input module for the FLEX I/O system. The module features 14-bit input resolution, wire-off/overrange/underrange detection, and cold-junction compensation via external compensators (1794-CJC2) for thermocouple accuracy.

The Allen-Bradley 1794-OF4I is a 4-channel isolated analog output module for the FLEX I/O system. The module supports Removal and Insertion Under Power (RIUP) for hot-swap maintenance and includes open-wire detection and field power monitoring diagnostics.