GE Mark

The GE Fanuc Emerson IC698CRE040 is a high-performance Redundancy CPU module for the PACSystems RX7i platform, purpose-built for mission-critical applications where system downtime is unacceptable. Powered by a 1.8 GHz Pentium-M microprocessor with 64 MB of battery-backed user RAM and 64 MB of non-volatile flash memory, it delivers exceptional processing speed and data integrity for complex industrial control systems. This CPU supports Hot Standby (HSB) redundancy, enabling seamless, bumpless failover between primary and backup controllers. When paired with an IC698RMX016 Redundancy Memory Xchange module, the CRU040 synchronizes logic execution and data between two identical CPUs, ensuring continuous operation even if one unit fails.

The GE Fanuc Emerson IC695CRU320 is a high-performance Redundancy CPU module for the PACSystems RX3i platform, specifically engineered for mission-critical applications where system downtime is not an option. It serves as the central processing unit for Hot Standby (HSB) redundancy configurations, enabling seamless, bumpless failover between primary and backup controllers in milliseconds. Powered by a 1 GHz Intel Celeron-M microprocessor with 64 MB of battery-backed RAM and 64 MB of non-volatile flash memory, the CRU320 delivers the processing power and data integrity required for demanding industrial control applications including power generation, water treatment, and continuous process manufacturing. The module occupies two slots in an RX3i rack and requires a Redundancy Memory Xchange (RMX) module (IC695RMX128/228) for synchronization link operation.

The GE Fanuc Emerson IC695CPE310 is a mid-range Central Processing Unit (CPU) module for the PACSystems RX7i / RX3i programmable automation controller platform. Powered by a 1.1 GHz Atom processor with 10 MB of user memory, it delivers reliable real-time control of machines, processes, and material handling systems. The CPE310 is a direct replacement for the legacy IC695CPU310 and offers significantly improved processing speed and memory capacity. It features embedded Ethernet and dual serial ports (RS-232 and RS-485), providing versatile connectivity for programming, HMI/SCADA, and plant-wide network integration.

The GE Fanuc Emerson IC695ETM001 is a high-performance Ethernet Interface Module for the PACSystems RX3i programmable automation controller platform. It enables the RX3i controller to communicate with other PACSystems equipment, as well as Series 90 and VersaMax controllers, over standard Ethernet networks. The module provides two auto-sensing 10BaseT/100BaseTX RJ-45 shielded twisted-pair Ethernet ports for direct connection to IEEE 802.3 networks without an external transceiver. Both ports are controlled by an embedded network switch, presenting a single Ethernet interface to the network with one MAC address and one IP address.

The GE Fanuc Emerson IC695PNS001 is a PROFINET Scanner Module for the PACSystems RX3i programmable automation controller platform. It connects a remote universal RX3i I/O rack containing Series 90-30 or RX3i modules to a PROFINET I/O Controller, scanning the modules in its rack to retrieve input data and provide output data across the PROFINET I/O LAN at the configured production rate . The module functions as the head-end unit responsible for monitoring and controlling the I/O modules installed in its RX3i I/O rack. All PROFINET communications pass between the PROFINET I/O Controller and the PNS, managing network communication and module configuration while maintaining proper I/O states during network communication loss .

The GE Fanuc Emerson IC698CPE040 is a high-performance Central Processing Unit (CPU) module for the PACSystems RX7i programmable automation controller platform. Powered by a 1.8 GHz Pentium-M microprocessor with 64 MB of user memory and 64 MB of non-volatile flash memory, it delivers exceptional processing speed and data handling for complex industrial automation applications. Designed for real-time control of machines, processes, and material handling systems, the IC698CPE040 communicates with I/O and smart option modules over a rack-mounted backplane using the VME64 standard format. Embedded Ethernet and multiple serial ports facilitate communication with programmers, HMI devices, and plant-wide networks.

The GE Fanuc IC697CPX782 is the highest-performance CPU module in the Series 90-70 PLC family, featuring a 96 MHz 32-bit 80486DX4 microprocessor with hardware floating-point math capability . It is a single-slot CPU designed for complex real-time control of machines, processes, and material handling systems in demanding industrial applications . The CPX782 provides 1 MB of battery-backed CMOS RAM for user program and data storage, plus 256 KB of non-volatile flash memory for optional program retention . It supports up to 12,288 discrete I/O points (any mix) and 8,000 analog I/O points, with an exceptionally fast Boolean execution rate of 0.4 microseconds per function . The module communicates with I/O and smart option modules over a rack-mounted backplane using the VME C.1 Standard format, and supports a wide range of option modules including LAN interfaces, coprocessors, bus controllers, and all IC697 discrete and analog I/O modules .

The GE Fanuc IC697CMM742 is a high-performance Ethernet Interface Module (Type 2) for the Series 90-70 PLC platform. It connects the IC697 PLC to an IEEE 802.3 CSMA/CD 10 Mbps Ethernet LAN, enabling TCP/IP communications for programming, configuration, data exchange, and diagnostics. The module features three network ports — 10BaseT (RJ-45), 10Base2 (BNC), and AUI (15-pin) — allowing direct connection to twisted-pair or ThinWire networks without an external transceiver, or flexible attachment to other media via a user-supplied AUI transceiver. Firmware is pre-loaded for easy installation and can be upgraded in-system via the RS-485 serial port.

The GE Fanuc IC693CPU374 is the highest-performance CPU module in the Series 90-30 PLC family, featuring an embedded dual-port Ethernet switch and 240 KB of configurable user memory . Powered by a 133 MHz AMD SC520 processor, it delivers exceptional scan performance of 0.15 milliseconds per 1K of Boolean logic, making it ideal for demanding industrial control applications . As the premium CPU option for the Series 90-30 platform, the CPU374 combines high-speed processing with built-in Ethernet connectivity — eliminating the need for separate communication modules while enabling seamless integration with plant-wide networks and SCADA systems.   

The GE Fanuc IC693CPU364 is a single-slot Central Processing Unit (CPU) module for the Series 90-30 PLC platform, featuring an embedded Ethernet interface and 240 KB of configurable user memory. It serves as the central processing engine for the Series 90-30 system, executing logic programs, managing I/O, and providing network communication capabilities. The CPU364 is distinguished as the only Series 90-30 CPU that supports Ethernet Global Data (EGD), enabling deterministic, high-speed data exchange between PLCs and other networked devices. With a 25 MHz 80386EX processor and a typical scan rate of 0.22 milliseconds per 1K of Boolean logic, it delivers reliable performance for demanding industrial control applications.  

The GE IS220PAICH1B is a high-precision Analog Input/Output (PAIC) Pack designed for the Mark VIe Speedtronic turbine control system. It serves as a distributed field I/O node that interfaces analog sensors and actuators directly with the Mark VIe controller over a dual-redundant Ethernet I/O network. The PAICH1B is the updated technology replacement for the legacy IS220PAICH1A, offering identical form, fit, and function with enhanced componentry for improved reliability and noise immunity. It provides 10 analog input channels and 2 analog output channels, enabling precise signal acquisition from pressure transmitters, temperature sensors, and flow meters, while delivering control signals to valves, positioners, and actuators.

The GE IS200SPIDG1A is a PROFIBUS Master Gateway Terminal Board (SPID) designed for the Mark VIe Speedtronic turbine control system. It serves as the physical interface layer between the Mark VIe controller and field-level PROFIBUS-DP networks, enabling communication with remote I/O packs, variable frequency drives, excitation controllers, and third-party protection relays. This board is a passive termination and signal conditioning module that works exclusively in conjunction with the IS220PPRFH PROFIBUS Master Gateway I/O Pack. It does not perform PROFIBUS master processing itself; instead, it routes, filters, and isolates the PROFIBUS signals between the field network and the PPRFH processing pack. The ABA suffix (IS200SPIDG1ABA) identifies the fully conformal-coated production revision, offering enhanced protection against moisture, oil mist, and corrosive contaminants typical in turbine enclosures.