Products

The Allen-Bradley 22-COMM-E is an EtherNet/IP communication adapter designed for the PowerFlex 4-Class drive family. It installs internally into the drive's communication option slot and enables direct EtherNet/IP network connectivity, allowing the drive to be controlled, configured, and monitored over a standard industrial Ethernet network.

The Allen-Bradley 1784-U2DN is a USB-to-DeviceNet interface cable designed to connect a PC to a DeviceNet network for programming, monitoring, and configuration. It includes a pod containing firmware that enables communication between the computer and the DeviceNet network. The firmware can be flash-upgraded when new features become available.

The Allen-Bradley 1783-BMS20CGN is a 20-port managed industrial Ethernet switch from the Stratix 5700 family. Built on Cisco Catalyst architecture with Full software, it integrates seamlessly into Rockwell Automation‘s Integrated Architecture and supports advanced industrial networking features including DLR, CIP Sync, and NAT.

The Allen-Bradley 1783-ETAP is a 3-port EtherNet/IP tap from the Stratix 4000 series. It connects devices that do not support embedded switch technology to a linear or Device Level Ring (DLR) network, enabling DLR ring topology integration for controllers, drives, and other EtherNet/IP devices.

The Allen-Bradley 1783-US16T is a 16-port unmanaged industrial Ethernet switch from the Stratix 2000 family. It provides plug-and-play network expansion for small control networks without requiring configuration. The switch features sixteen copper RJ45 ports with autonegotiation for speed and duplex, and is designed for DIN-rail mounting in industrial environments.

The Allen-Bradley 1783-US5T is a 5-port unmanaged industrial Ethernet switch from the Stratix 2000 family. It provides plug-and-play network expansion for small, isolated control networks without requiring configuration. The switch features five copper RJ45 ports with autonegotiation for speed and duplex, and is designed for DIN-rail mounting in industrial environments.

The Allen-Bradley 1783-SFP1GLX is a 1000BASE-LX/LH single-mode fiber optic SFP transceiver from the Stratix series. It provides Gigabit Ethernet connectivity over single-mode fiber with dual LC connectors, supporting distances up to 10 km. The module is designed for use in Rockwell Automation Stratix managed Ethernet switches and other compatible network equipment.

The Allen-Bradley 1606-XLS480E-3 is a 480W three-phase Performance Power Supply from the XLS series, providing a stabilized 24–28V DC output with 20A continuous current. It accepts 3-phase 380–480V AC wide-range input (or 600V DC), features active power factor correction, and delivers a 50% power reserve for demanding loads. Its compact 65mm-wide housing is designed for DIN-rail mounting in industrial control panels.

The Allen-Bradley 1606-XLE120E is a 120W Essential Power Supply from the 1606-XLE series, providing a stabilized 24–28V DC output with 5A continuous current. It accepts 120/240V AC input with auto-selection, features active power factor correction, and delivers 120% power boost for demanding loads. Its compact 32mm-wide housing is designed for DIN-rail mounting in industrial control panels.

The Allen-Bradley 1606-XL480EP is a single-phase, 480W power supply from the XL series, providing a stabilized 24–28V DC output with up to 20A continuous current. It features active power factor correction, a 20% power reserve, and a compact 65mm-wide housing designed for industrial control and instrumentation applications.

The Allen-Bradley 1606-XLS240E is a 240W Performance Power Supply from the 1606-XLS series, providing a stabilized 24V DC output with up to 10A continuous current. It accepts both AC (100–240V) and DC (110–150V) input, features active power factor correction, and includes integrated diagnostics for reliable industrial control power.

The Allen-Bradley 150-F625NBA is a solid-state smart motor controller from the SMC Flex product line. It is a 625 A controller rated for 500 HP at 460V AC, designed for controlled starting and stopping of standard 3-phase squirrel-cage induction motors. The controller features an open enclosure, integrated LCD display, and keypad for local configuration and diagnostics.