The Bently Nevada 330710-00-060-10-02-00 is a 3300 XL 11 mm Proximity Probe designed for non-contact vibration and position measurement on large, fluid-film bearing machinery. Its 11 mm tip provides a longer linear range compared to the standard 8 mm system, making it ideal for applications requiring greater measurement span, such as axial thrust position, differential expansion, and radial vibration on steam turbines, centrifugal compressors, and large pumps.
Item No :
330710-00-060-10-02-00Order(MOQ) :
1 PiecePayment :
EXWProduct Origin :
USAShipping Port :
WuhanLead Time :
3-5daysWeight :
3kg| Specification | Description |
|---|---|
| Manufacturer | Bently Nevada (Baker Hughes) |
| Model | 330710-000-060-10-02-00 |
| Product Family | 3300 XL 11 mm Proximity Transducer System |
| Product Type | Eddy-Current Proximity Probe (Armored, Metric) |
| Probe Tip Diameter | 11 mm |
| Case Thread | M16 × 1.5 (max thread engagement: 24 mm) |
| Unthreaded Length | 000 = 0 mm |
| Overall Case Length | 060 = 60 mm |
| Total Cable Length | 10 = 1.0 meter |
| Connector Type | 02 = Miniature coaxial ClickLoc™ connector, standard cable |
| Agency Approval | 00 = Not required (general purpose) |
| Sensitivity | 3.94 V/mm (100 mV/mil) |
| Linear Range | Longer range than 8 mm system (approx. 4 mm) |
| Probe Tip Material | Polyphenylene Sulfide (PPS) |
| Case Material | AISI 304 Stainless Steel |
| Cable Type | 75 Ω triaxial, FEP insulated |
| Minimum Target Diameter (Flat) | 30.5 mm |
| Recommended Shaft Diameter | 152 mm |
| Recommended Case Torque | 21.1 N·m (187 in·lb) |
| Maximum Case Torque | 63.3 N·m (560 in·lb) |
| Minimum Bend Radius | 25.4 mm (1.0 in) |
| Operating Temperature | -52°C to +177°C (-62°F to +351°F) |
| Storage Temperature | -52°C to +105°C (-62°F to +221°F) |
| Humidity | 100% condensing, non-submersible |
| Pressure Seal | Viton O-ring (not pressure tested; contact custom dept) |
| Country of Origin | USA |
| Lifecycle Status | Active / Mature |
Part Number Breakdown (330710-000-060-10-02-00):
330710 – 3300 XL 11 mm probe, M16×1.5 thread, with armor
-000 – Unthreaded length: 0 mm
-060 – Overall case length: 60 mm
-10 – Total cable length: 1.0 meter
-02 – ClickLoc™ connector, standard cable
-00 – Agency approval: Not required
| Model | Description | Typical Application |
|---|---|---|
| 330710-000-060-10-02-00 (this model) | 11mm probe, 60mm case, 1.0m cable, M16×1.5 | Standard 1m system, short-run installation |
| 330710-000-050-50-02-05 | 11mm probe, 50mm case, 5.0m cable, hazardous approvals | ATEX/IECEx installations, 5m system |
| 330710-000-050-90-02-05 | 11mm probe, 50mm case, 9.0m cable, hazardous approvals | Extended cable runs, 9m system |
| 330710-000-050-10-02-00 | 11mm probe, 50mm case, 1.0m cable, no approvals | Standard 1m system, no approval needed |
| 330703 | 11mm probe, M14×1.5 thread, without armor | Alternative thread for M14 mounting |
| 330130-xxx | 3300 XL 8mm extension cables | Not compatible – different probe diameter |
| 330180-50-00 | 3300 XL 11mm Proximitor® Sensor, 5m system | Required sensor for 5m system |
| 330180-90-00 | 3300 XL 11mm Proximitor® Sensor, 9m system | Required sensor for 9m system |
Q1: What is the primary function of the 330710-000-060-10-02-00?
It is an 11 mm eddy-current proximity probe used for non-contact measurement of shaft vibration, axial position, and differential expansion on large rotating machinery. Its larger tip provides a longer linear range than the standard 8 mm system, making it suitable for applications requiring greater measurement span .
Q2: What are the key differences between the 11 mm and 8 mm probe systems?
The 11 mm probe has a larger tip diameter and a longer linear range (approximately 4 mm vs. 2 mm for 8 mm probes). Its output sensitivity is 3.94 V/mm (100 mV/mil) compared to 7.87 V/mm (200 mV/mil) for 8 mm probes . The 11 mm system is primarily used for axial thrust position, differential expansion, and radial vibration on large turbines and compressors with large bearing clearances.
Q3: What do the part number segments mean for this probe?
330710 = 11 mm probe, M16×1.5 thread, with armor
-000 = 0 mm unthreaded length (fully threaded)
-060 = 60 mm overall case length
-10 = 1.0 meter cable length
-02 = ClickLoc™ connector, standard cable
-00 = No agency approvals (general purpose)
Q4: How do I match this probe with a Proximitor sensor?
The total electrical length of the probe cable plus extension cable must equal the Proximitor's rated system length. Since this probe has a 1.0m cable, you must pair it with a 1.0m Proximitor sensor (or use a 4.0m extension cable for a 5.0m system). Important: The 3300 XL 11 mm system components are not interchangeable with 8 mm system components .
Q5: What are the installation and torque requirements?
Recommended case torque: 21.1 N·m (187 in·lb) using the M16×1.5 thread
Maximum case torque: 63.3 N·m (560 in·lb)
Connector torque: Finger tight only (max 0.565 N·m)
Minimum bend radius: 25.4 mm (1.0 in)
Recommended shaft diameter: 152 mm minimum
The Bently Nevada 330105-02-12-05-02-00 is an 8 mm reverse-mount proximity probe from the 3300 XL series, engineered for non-contact vibration and position monitoring in space-constrained machinery.
The Bently Nevada 330130-085-00-00 is an 8.5-meter standard extension cable for the 3300 XL 8 mm Proximity Transducer System. It connects a 3300 XL proximity probe to its Proximitor® sensor, transmitting eddy-current displacement signals for vibration, axial position, and Keyphasor measurements on critical rotating machinery.
The Bently Nevada 21000-00-00-15-030-04-00 is a Proximity Probe Housing Assembly from the 21000 series, designed to provide a secure, environmentally sealed mounting interface for reverse-mount proximity probes on critical rotating machinery.
The Bently Nevada 330780-50-00 is a 5.0-meter Proximitor® Sensor for the 3300 XL 11 mm Proximity Transducer System. It receives signals from a 3300 XL 11 mm probe and its extension cable, conditioning them into a linear voltage output proportional to shaft displacement for radial vibration, axial thrust position, and Keyphasor measurement.
The Bently Nevada 21747-040-00 is a 4-meter Proximitor probe extension cable designed for the 3300 and 7200 Series Proximity Transducer Systems. It connects a proximity probe to its Proximitor sensor, transmitting high-frequency eddy-current displacement signals for vibration and shaft position monitoring on critical rotating machinery.
The Bently Nevada 330710-00-060-10-02-00 is a 3300 XL 11 mm Proximity Probe designed for non-contact vibration and position measurement on large, fluid-film bearing machinery. Its 11 mm tip provides a longer linear range compared to the standard 8 mm system, making it ideal for applications requiring greater measurement span, such as axial thrust position, differential expansion, and radial vibration on steam turbines, centrifugal compressors, and large pumps.
The Bently Nevada 330103-00-11-50-02-00 is a 3300 XL 8 mm proximity probe with a metric M10×1 thread and a 5.0-meter integral cable terminated with a miniature coaxial ClickLoc™ connector. This extended-reach configuration features a 110 mm overall case length and connects directly to a Proximitor® sensor without requiring an extension cable for short-run installations.
The Bently Nevada 990-10-XX-01-00 (MOD 165353-01) is a two-wire, loop-powered Vibration Transmitter designed for OEMs of centrifugal air compressors, small pumps, motors, and fans. It accepts input from a 3300 NSv proximity probe and its matching extension cable, conditioning the signal into a 4–20 mA output proportional to peak-to-peak vibration amplitude.
Scan to Wechat :
Scan to WhatsApp :
