The Bently Nevada 330103-00-11-50-02-00 is a 3300 XL 8 mm proximity probe with a metric M10×1 thread and a 5.0-meter integral cable terminated with a miniature coaxial ClickLoc™ connector. This extended-reach configuration features a 110 mm overall case length and connects directly to a Proximitor® sensor without requiring an extension cable for short-run installations.
Item No :
330103-00-11-50-02-0Order(MOQ) :
1 PiecePayment :
EXWProduct Origin :
USAShipping Port :
WuhanLead Time :
3-5daysWeight :
3kg| Specification | Description |
|---|---|
| Manufacturer | Bently Nevada (Baker Hughes) |
| Model | 330103-00-11-50-02-00 |
| Product Family | 3300 XL 8 mm Proximity Transducer System |
| Product Type | Eddy-Current Proximity Probe (Metric, Non-Armored) |
| Case Thread | M10 × 1 (Metric) |
| Unthreaded Length | 00 = 0.0 mm (fully threaded) |
| Overall Case Length | 11 = 110 mm (≈4.3 in) |
| Total Cable Length | 50 = 5.0 meters (16.4 ft) |
| Connector Type | Miniature coaxial ClickLoc™, standard cable |
| Agency Approval | 00 = Not required (general purpose) |
| Probe Tip Material | Polyphenylene Sulfide (PPS) |
| Case Material | AISI 303/304 Stainless Steel |
| Linear Measurement Range | 2.0 mm (80 mils) |
| Sensitivity | 7.87 V/mm (200 mV/mil) |
| Recommended Gap | 1.27 mm (50 mils) @ approximately -9 VDC |
| Operating Temperature | -52°C to +177°C (-62°F to +350°F) |
| Frequency Response | 0 to 10 kHz (+0/-3 dB) |
| Minimum Bend Radius | 25.4 mm (1.0 in) |
| Maximum Thread Engagement | 15 mm for M10×1 |
| Weight | Approx. 0.92 kg (probe with 5m cable) |
| Country of Origin | USA |
Part Number Breakdown (330103-00-11-50-02-00):
| Model | Description | Typical Application |
|---|---|---|
| 330103-00-11-50-02-00 (this model) | 8mm M10×1 probe, 110mm case, 5.0m cable, no approvals | Standard 5m system, short-run installation |
| 330103-00-03-50-02-00 | Same probe with 30 mm case length | Tight clearance applications |
| 330103-00-11-50-02-05 | Same configuration with hazardous area approvals (CSA/ATEX/IECEx) | ATEX/IECEx Zone 2 installations |
| 330103-00-18-10-02-00 | Same series with 180 mm case and 1.0m cable | Deep mounting, short cable runs |
| 330130-040-00-00 | 4.0m extension cable | Extending probe to 9.0m system length |
| 330180-50-00 | 3300 XL Proximitor® Sensor, 5m system | Required for 5m system (probe connects directly) |
Q1: What is the primary function of this probe?
It is an eddy-current proximity probe that measures shaft vibration and axial position on rotating machinery. It outputs a voltage proportional to the gap between the probe tip and the conductive shaft surface, enabling real-time condition monitoring and protection.
Q2: What do the part number segments mean?
Q3: How do I match this probe with a Proximitor sensor?
The total electrical length of the probe cable plus extension cable must equal the Proximitor's rated system length. Since this probe has a 5.0m cable, it connects directly to a 5.0m Proximitor (e.g., 330180-50-00) without an extension cable. For a 9.0m Proximitor system, a 4.0m extension cable would be required.
Q4: What is the recommended installation gap and voltage?
The optimal gap is 1.27 mm (50 mils), yielding an output of approximately -9 VDC at the Proximitor. The linear operating range spans approximately -1 VDC to -17 VDC.
Q5: Is this probe interchangeable with other 3300 XL components?
Yes. All 3300 XL 8mm system components are designed for full interchangeability. Probes, extension cables, and Proximitor sensors can be mixed and matched without bench calibration, provided the total electrical lengths match.
The Bently Nevada 330105-02-12-05-02-00 is an 8 mm reverse-mount proximity probe from the 3300 XL series, engineered for non-contact vibration and position monitoring in space-constrained machinery.
The Bently Nevada 330130-085-00-00 is an 8.5-meter standard extension cable for the 3300 XL 8 mm Proximity Transducer System. It connects a 3300 XL proximity probe to its Proximitor® sensor, transmitting eddy-current displacement signals for vibration, axial position, and Keyphasor measurements on critical rotating machinery.
The Bently Nevada 21000-00-00-15-030-04-00 is a Proximity Probe Housing Assembly from the 21000 series, designed to provide a secure, environmentally sealed mounting interface for reverse-mount proximity probes on critical rotating machinery.
The Bently Nevada 330780-50-00 is a 5.0-meter Proximitor® Sensor for the 3300 XL 11 mm Proximity Transducer System. It receives signals from a 3300 XL 11 mm probe and its extension cable, conditioning them into a linear voltage output proportional to shaft displacement for radial vibration, axial thrust position, and Keyphasor measurement.
The Bently Nevada 21747-040-00 is a 4-meter Proximitor probe extension cable designed for the 3300 and 7200 Series Proximity Transducer Systems. It connects a proximity probe to its Proximitor sensor, transmitting high-frequency eddy-current displacement signals for vibration and shaft position monitoring on critical rotating machinery.
The Bently Nevada 330710-00-060-10-02-00 is a 3300 XL 11 mm Proximity Probe designed for non-contact vibration and position measurement on large, fluid-film bearing machinery. Its 11 mm tip provides a longer linear range compared to the standard 8 mm system, making it ideal for applications requiring greater measurement span, such as axial thrust position, differential expansion, and radial vibration on steam turbines, centrifugal compressors, and large pumps.
The Bently Nevada 330103-00-11-50-02-00 is a 3300 XL 8 mm proximity probe with a metric M10×1 thread and a 5.0-meter integral cable terminated with a miniature coaxial ClickLoc™ connector. This extended-reach configuration features a 110 mm overall case length and connects directly to a Proximitor® sensor without requiring an extension cable for short-run installations.
The Bently Nevada 990-10-XX-01-00 (MOD 165353-01) is a two-wire, loop-powered Vibration Transmitter designed for OEMs of centrifugal air compressors, small pumps, motors, and fans. It accepts input from a 3300 NSv proximity probe and its matching extension cable, conditioning the signal into a 4–20 mA output proportional to peak-to-peak vibration amplitude.
Scan to Wechat :
Scan to WhatsApp :
