Other

The SIEMENS LME22.331C2 is a microprocessor-based gas burner control unit designed for the startup and supervision of 1- or 2-stage gas or gas/oil burners in intermittent operation. It serves as a modern digital replacement for legacy electromechanical models such as the LGB22.330A27 and LMG22.330B27, offering identical housing dimensions for seamless retrofitting.

The SIEMENS 6RY1802-0AA10 is a spare part busbar current transformer designed for Siemens industrial drive systems. This measurement transformer is mounted on or around the busbar to measure alternating current without direct electrical contact, providing galvanically isolated current signals for the drive's control and protection circuits.

The SIEMENS 6RY1801-0AA04 is a spare part fan designed for Siemens industrial drive systems. This cooling fan is a critical thermal management component that ensures power electronics and control circuits within the drive remain within safe operating temperatures during continuous operation.

The SIEMENS C98043-A7113-L1 is a TSE Capacitor Module (also described as a capacitor-resistor board) designed as a spare part for Siemens industrial drive systems. It is identified by the order number 6RY1803-0FA10 and is classified under Siemens product group 3645 . This module serves as a critical passive component within the drive's power section, contributing to voltage stabilization and transient suppression.  

The Siemens 6ES7212-1BB23-0XB0 is a CPU 222 compact unit from the SIMATIC S7-200 series. Its core function is to serve as a compact, micro-programmable logic controller (PLC) for small to medium-scale automation tasks. It provides a fixed set of I/O points and offers expandability, making it suitable for applications that require a flexible balance of performance and cost.

The Siemens 6ES7212-1AB23-0XB0 is a CPU 222 compact unit from the SIMATIC S7-200 series. Its core function is to serve as a compact, micro-programmable logic controller (PLC) for small to medium-scale automation tasks. It provides a fixed set of I/O points and offers expandability, making it suitable for applications that require a flexible balance of performance and cost.  

The Siemens 6ES7211-0BA23-0XB0 is a CPU 221 compact unit from the SIMATIC S7-200 series. Its core function is to serve as a compact, micro-programmable logic controller (PLC) for small-scale automation tasks. It provides a fixed set of I/O points and basic program memory to control simple machinery and processes without the need for expansion modules.  

The Siemens 6SE7090-0XX84-0FF0 is a PROFIBUS communication module (CBP - Communication Board PROFIBUS) designed for the SIMOVERT MASTERDRIVES Motion Control series. Its core function is to serve as the communication interface between the drive system and a PROFIBUS DP network, enabling the exchange of control data, setpoints, and status information with higher-level automation systems such as PLCs and DCS platforms.

The Siemens 6SE7090-0XX84-1GA1 is a Voltage Sensor Board (VSB) module designed for the SIMOVERT MASTERDRIVES AFE (Active Front End) drive systems. Its core function is to continuously measure the three-phase AC power supply voltage at the drive's input, providing real-time analog signals to the CUSA (AFE control module) for synchronization calculations. This enables the AFE inverter to switch in sync with the line voltage, ensuring stable and efficient regenerative operation.

The Siemens 6SE7041-2WL84-1JC0 is an IGD9 (Inverter Gate Driver) control board designed for the SIMOVERT MASTERDRIVES 6SE70 series variable frequency drives. Its core function is to serve as the inverter control and gate driver module, responsible for generating trigger pulses for the IGBT power modules, performing current and voltage detection, and providing fault protection for high-power drive systems.

6SE7090-0XX84-0BJ0 Master drives Module New in stock 1 year warranty Origin from Romania

The Siemens 6SL3350-6TK00-0EA0 is a Control Interface Module (CIM) designed for SINAMICS air-cooled drive systems, specifically the G130 and G150 series. Its core function is to serve as a critical interface board that facilitates communication and control between the drive's power unit and the central control unit. It is a genuine Siemens spare part, ensuring seamless integration and reliable operation within industrial automation setups.