The Siemens 6SE7090-0XX84-0AD1 is a high-performance Motion Control Unit (CU) from the SIMOVERT MASTERDRIVES series . As the central intelligence of the drive system, this module executes all closed-loop control algorithms, translating speed, position, or torque setpoints into precise PWM commands to drive the IGBT inverter .
This "universal spare" Motion Control CU is engineered for demanding applications that require more than simple speed regulation—it adds position control, coordinated multi-axis motion, and synchronous servo motor support to the proven MASTERDRIVES platform.
Item No :
6SE7090-0XX84-0AD1Order(MOQ) :
1Payment :
EXWProduct Origin :
GermanyShipping Port :
Wuhan, Hubei, ChinaLead Time :
3-5 daysWeight :
0.5kgProduct Overview
Siemens 6SE7090-0XX84-0AD1 SIMOVERT MASTERDRIVES Motion Control Board
High-Performance 60 MHz Motion Control CU for Masterdrives
Motion Control (MC) Firmware: Extends drive capability from basic speed regulation to full position control, coordinated motion, and electronic gearing
60 MHz High-Speed Processor: Enables rapid response times for demanding closed-loop control applications
Position Control Capability: Adds a position control outer loop for precise positioning applications—not available in standard Vector Control CU variants
Multi-Axis Synchronization: Supports coordinated motion for gantry systems, coordinated winders, and electronic gearboxes
Universal Spare Format (0XX84): Compatible with all MASTERDRIVES Motion Control chassis sizes, simplifying spare parts management
Servo Motor Support: Drives both standard induction motors and synchronous servo motors (permanent magnet type) with field-oriented control
Comprehensive Protection: Built-in overcurrent, short-circuit, and thermal protection for safe operation
Versatile Communication: Supports PROFIBUS DP, PROFINET, RS232/RS485 serial ports
| Category | Specification |
|---|---|
| Manufacturer | Siemens |
| Model Number | 6SE7090-0XX84-0AD1 |
| Product Type | Motion Control Board / Closed-Loop Motion Control Module |
| Series | SIMOVERT MASTERDRIVES |
| Processor Speed | 60 MHz |
| Control Type | Motion Control (MC) |
| Format | Universal spare (0XX84) |
| Parameter | Detail |
|---|---|
| Digital Inputs | 8 x 24V DC, optically isolated |
| Digital Outputs | 4 x (relay or transistor) |
| Analog Inputs | 2 x (0-10V or 4-20mA, 12-bit) |
| Analog Outputs | 2 x (0-10V or 4-20mA, 12-bit) |
| Serial Interfaces | RS232 / RS485 |
| Fieldbus Support | PROFIBUS DP, PROFINET |
| Encoder Interface | 1 x incremental encoder (TTL, 1024 kHz) |
| Parameter | Detail |
|---|---|
| Operating Temperature | 0°C to 60°C |
| Storage Temperature | -25°C to 70°C |
| Ingress Protection | IP20 |
| Dimensions (L x W x H) | 27.0 x 13.0 x 2.0 cm |
| Weight | Approx. 0.36 kg |
| Product Status | Discontinued since 30 Sept 2020 |
| Successor | 6SE7090-0XX84-0AD5 |
| Country of Origin | Germany |
| Customs Tariff | 85049090 |
The 6SE7090-0XX84-0AD1 supports multiple advanced control modes for different application requirements :
| Control Mode | Description |
|---|---|
| Vector Control (VC) | Enables 0.01% speed control precision and 200% rated torque at low speeds. Supports Sensorless (SLVC) and Field-Oriented (FVC) variants |
| V/F Control | Voltage/frequency ratio control for pumps, fans, and general-purpose loads |
| Servo Control | Position closed-loop via encoder feedback, for precise positioning applications |
Dynamic Response:
Speed step response: ≤100 ms
Torque step response: ≤50 ms
The 6SE7090-0XX84-0AD1 is the appropriate Control Unit for applications requiring any of the following :
| Industry | Application |
|---|---|
| Metallurgy | Rolling mill drives, wire drawing machines |
| Printing & Paper | Register control, flying shears, cross-cutters, electronic line-shafting |
| Material Handling | Hoist and crane drives |
| General Automation | Coordinated multi-axis systems, gantry systems, electronic gearboxes |
| Servo Applications | High-precision position control with synchronous servo motors |
The 6SE7090-0XX84-0AD1 has been discontinued since 30 September 2020
The official successor is 6SE7090-0XX84-0AD5
The -AD1 version is widely interchangeable with earlier revisions; e.g., a Version G board can replace a Version F board
The part number ABB UNS 0885a-Z V1 (3BHB006943R0001) has a wide range of conflicting descriptions across different sources. Based on the most consistent manufacturer-aligned evidence, it is identified as a Converter Display Board for the UNITROL UN 5000 converter system.
The ABB UNS 0017a-P V1 (HIEE305106R0001) is a Firing Card (Trigger Board) designed for ABB's UNITROL 6000 X-power static excitation systems and legacy high-power thyristor converter cabinets. The board is engineered for high electromagnetic noise environments typical of power generation and heavy industrial drive applications.
The ABB UNS 1860b-P V1 (3BHB001336R0001) is a Measuring Interface Board (MUB) designed for ABB's UNITROL 5000/6000 static excitation systems. The board performs high-precision isolation, filtering, and A/D conversion, converting raw field signals into digital data for the excitation controller (CPU) via the backplane bus.
The ABB AINP-01C is an Input Bridge Control Board / Inverter Trigger Board engineered specifically for the ABB ACS800 series drives. It serves as the core rectifier control component, responsible for generating precision-timed firing pulses to control thyristors in the drive's input bridge.
The ABB AINT-14C (68685826D) is a Main Circuit Interface Board designed for the ABB ACS800 series drives. It serves as the critical signal bridge between the drive's control unit and external automation systems (PLC/DCS), handling analog/digital I/O and DDCS fiber optic communication.
The Siemens C98043-A7010-L2-5 is a Field Excitation Power Board designed for the SIMOREG DC-MASTER 6RA70 series of DC drives. This module serves as the core power supply and control unit for the DC motor's field winding, providing stable and precisely regulated excitation current to maintain a consistent magnetic field in the motor.
LF505-S/SP27 Spare Part New in stock 1 year warranty Origin from Romania
C98043-A7002-L4 Spare Part New in stock 1 year warranty Origin from Germany
Scan to Wechat :
Scan to WhatsApp :
