Bentley Nevada

The Bently Nevada 330103-00-11-50-02-00 is a 3300 XL 8 mm proximity probe with a metric M10×1 thread and a 5.0-meter integral cable terminated with a miniature coaxial ClickLoc™ connector. This extended-reach configuration features a 110 mm overall case length and connects directly to a Proximitor® sensor without requiring an extension cable for short-run installations.

The Bently Nevada 990-10-XX-01-00 (MOD 165353-01) is a two-wire, loop-powered Vibration Transmitter designed for OEMs of centrifugal air compressors, small pumps, motors, and fans. It accepts input from a 3300 NSv proximity probe and its matching extension cable, conditioning the signal into a 4–20 mA output proportional to peak-to-peak vibration amplitude. 

The Bently Nevada 990-05-XX-01-00 (MOD 147202-01) is a two-wire, loop-powered Vibration Transmitter designed specifically for OEMs of centrifugal air compressors, small pumps, motors, and fans. It accepts input from a 3300 NSv proximity probe and its matching extension cable, conditioning the signal into a 4–20 mA output proportional to peak-to-peak vibration amplitude.

The Bently Nevada 991-01-XX-01-00 (MOD 284318-01) is a two-wire, loop-powered Thrust Transmitter designed for OEMs of centrifugal air compressors, small pumps, motors, and fans. It accepts input from a 3300 NSv proximity probe and converts axial shaft displacement into a standard 4–20 mA signal proportional to thrust position.

The Bently Nevada 330130-080-00-00 is a standard 8.0-meter extension cable for the 3300 XL Proximity Transducer System. It connects a 3300 XL proximity probe to its Proximitor® sensor, transmitting eddy-current displacement signals for vibration, position, and Keyphasor measurements on critical rotating machinery. 

The part number Bently Nevada 164517-070-10-02-00 is a 3300 Series Ceramic Capped Proximity Probe designed for machinery monitoring in aggressive chemical or high-pressure environments.

The part number 176449-02 is widely recognized as the front card (main board) for the Bently Nevada 3500/42M Proximitor/Seismic Monitor used in the 3500 Machinery Protection System. This 4-channel module processes signals from proximity probes and seismic transducers to monitor radial vibration, axial position, and other critical parameters for rotating machinery protection.

The Bently Nevada 127610-01+125840-01 is a dual high-voltage AC power supply module designed for the 3500 Series Machinery Protection System. It is a half-height module that provides regulated power to all monitoring modules installed in the 3500 rack, ensuring continuous operation of critical rotating machinery protection systems.

The Bently Nevada 288062-02 is a 2-channel Tachometer Module from the 3500 Machinery Protection System, designed to measure shaft rotational speed, rotor acceleration, and rotor direction. The module also supplies conditioned Keyphasor® signals to the 3500 rack backplane, eliminating the need for a separate Keyphasor module in many configurations.

The Bently Nevada 3500/50M-01-00 is a 2-channel Tachometer Module from the 3500 Machinery Protection System, designed to measure shaft rotational speed, rotor acceleration, and rotor direction. The module also supplies conditioned Keyphasor® signals to the 3500 rack backplane, eliminating the need for a separate Keyphasor module in many configurations.

The Bently Nevada 3500/22-01-01-01 is a Transient Data Interface (TDI) Module for the 3500 Machinery Protection System. It serves as the primary communication gateway between the 3500 rack and Bently Nevada’s System 1 condition monitoring software, combining the functions of a Rack Interface Module (RIM) with a high-speed data acquisition processor.

The Bently Nevada 3500/15-02-02-00 is a dual high-voltage AC power supply module designed for the 3500 Series Machinery Protection System. It is a half-height module that provides regulated power to all monitoring modules installed in the 3500 rack, ensuring continuous operation of critical rotating machinery protection systems.