The Bently Nevada 330103-08-13-10-02-00 is a 3300 XL 8mm Proximity Probe from Baker Hughes, the industry standard for non‑contact vibration and position monitoring on critical rotating machinery. The 3300 XL system delivers full interchangeability among probes, extension cables, and Proximitor sensors, eliminating the need for matched‑set calibration.
Item No :
330103-08-13-10-02-0Order(MOQ) :
1 PiecePayment :
EXW/CIFProduct Origin :
USAShipping Port :
WuhanLead Time :
3-5daysWeight :
3kg| Specification | Description |
|---|---|
| Manufacturer | Bently Nevada (Baker Hughes) |
| Model | 330103-08-13-10-02-00 |
| Product Family | 3300 XL 8mm Proximity Probe System |
| Product Type | Eddy‑Current Proximity Probe (Unarmored, Metric) |
| Probe Diameter | 8 mm |
| Thread Type | M10 × 1 (metric) |
| Unthreaded Length | -08 = 8 mm |
| Overall Case Length | -13 = 130 mm |
| Cable Length | -10 = 1.0 meter |
| Connector Type | -02 = Standard cable with miniature coaxial ClickLoc™ connector |
| Agency Approval | -00 = No special approvals required |
| Case Material | AISI 303/304 Stainless Steel |
| Tip Material | Polyphenylene Sulfide (PPS) |
| Sealing System | Viton® O‑ring pressure seal |
| Linear Measurement Range | 0.25 mm to 2.3 mm (10 to 90 mils) |
| Optimal Gap Setting | 1.27 mm (50 mils) @ approx. -9.0 VDC |
| Sensitivity | 7.87 V/mm (200 mV/mil) ±5% |
| Output Voltage Range | -1 VDC to -17 VDC (linear) |
| Output Impedance | 50 Ω nominal |
| Temperature Range (Probe Tip) | -51°C to +177°C (-60°F to +350°F) |
| Temperature Range (Cable) | -51°C to +260°C (-60°F to +500°F) |
| Minimum Temperature for Seal | -34°C (-30°F) recommended to prevent premature seal failure |
| Compliance | API 670 Standard (4th Edition) |
| Weight | Approx. 0.32 kg (323 grams per meter) |
| Country of Origin | USA |
Part Number Breakdown (330103-08-13-10-02-00) :
330103 – Base: 3300 XL 8mm Probe, M10×1 thread, unarmored
-08 – Unthreaded Length: 8 mm
-13 – Overall Case Length: 130 mm
-10 – Total Cable Length: 1.0 meter
-02 – Connector Type: Standard cable, miniature coaxial ClickLoc™
-00 – Agency Approval: None required
| Model | Description | Typical Application |
|---|---|---|
| 330103-08-13-10-02-05 | Same probe configuration with agency approvals (-05 = CSA/ATEX/IECEx for hazardous areas) | Hazardous area installations requiring certifications |
| 330103-00-08-10-02-00 | Similar unarmored metric probe; zero unthreaded length | Alternative configuration for different mounting depth |
| 330104-08-13-10-02-00 | Armored version of the metric probe; M10×1 thread | Mechanical cable protection in harsh/damage‑prone environments |
| 330180-50-00 | 3300 XL 8mm Proximitor Sensor (5m system length) | Sensor required to complete the transducer system |
| 330130-040-00-00 | 3300 XL extension cable (4.0m) | Required if total probe + extension length ≠ 5m must match Proximitor length |
| 21000-16-05-00-019-03-02 | 21000-16-10-00-045-04-02 | 21000-28-05-15-012-04-02 |
| 21000-16-05-00-030-04-02 | 21000-16-10-00-053-03-02 | 21000-28-05-15-028-04-02 |
| 21000-16-05-00-038-04-02 | 21000-16-10-00-067-04-02 | 21000-28-05-15-50-03-02 |
| 21000-16-05-00-039-03-02 | 21000-16-10-00-095-04-02 | 21000-28-10-00-041-04-02 |
| 21000-16-05-00-040-03-02 | 21000-16-10-00-098-04-02 | 21000-16-10-15-071-03-02 |
| 21000-16-05-00-043-03-02 | 21000-16-10-00-120-03-02 | 21000-16-10-15-075-03-02 |
| 21000-16-05-00-043-04-02 | 21000-16-10-00-244-04-02 | 21000-16-10-15-102-03-02 |
| 21000-16-05-00-050-03-02 | 21000-16-10-00-256-13-02 | 21000-16-05-00-066-03-02 |
Q1: What is the primary application for the 330103-08-13-10-02-00 probe?
It is an eddy‑current proximity probe used for non‑contact measurement of vibration and shaft position on rotating machinery, including steam turbines, compressors, and pumps. It outputs a voltage proportional to the gap between the probe tip and the target shaft, enabling real‑time radial vibration and axial thrust monitoring .
Q2: What do the different segments in the part number mean?
Each segment defines a specific configuration: 330103 = 8mm metric probe (M10×1, unarmored); -08 = 8mm unthreaded length; -13 = 130mm case length; -10 = 1.0m cable; -02 = ClickLoc connector with standard cable; -00 = no agency approvals .
Q3: Is this probe compatible with other 3300 XL system components?
Yes. All 3300 XL 8mm components are designed for full interchangeability. Probes, extension cables, and Proximitor sensors can be mixed and matched without bench calibration, provided the total electrical lengths match — the probe cable length plus extension cable length must equal the Proximitor’s rated system length .
Q4: What is the recommended installation gap and corresponding voltage?
The optimal gap is 1.27 mm (50 mils) , which yields an output voltage of approximately -9.0 VDC at the Proximitor . The linear operating range spans -1 VDC to -17 VDC .
Q5: What are the temperature limitations for this probe?
The probe tip operates from -51°C to +177°C, while the cable withstands up to +260°C . Important: Exposing the probe to temperatures below -34°C may cause premature failure of the Viton® pressure seal.
The Bently Nevada 330105-02-12-05-02-00 is an 8 mm reverse-mount proximity probe from the 3300 XL series, engineered for non-contact vibration and position monitoring in space-constrained machinery.
The Bently Nevada 330130-085-00-00 is an 8.5-meter standard extension cable for the 3300 XL 8 mm Proximity Transducer System. It connects a 3300 XL proximity probe to its Proximitor® sensor, transmitting eddy-current displacement signals for vibration, axial position, and Keyphasor measurements on critical rotating machinery.
The Bently Nevada 21000-00-00-15-030-04-00 is a Proximity Probe Housing Assembly from the 21000 series, designed to provide a secure, environmentally sealed mounting interface for reverse-mount proximity probes on critical rotating machinery.
The Bently Nevada 330780-50-00 is a 5.0-meter Proximitor® Sensor for the 3300 XL 11 mm Proximity Transducer System. It receives signals from a 3300 XL 11 mm probe and its extension cable, conditioning them into a linear voltage output proportional to shaft displacement for radial vibration, axial thrust position, and Keyphasor measurement.
The Bently Nevada 21747-040-00 is a 4-meter Proximitor probe extension cable designed for the 3300 and 7200 Series Proximity Transducer Systems. It connects a proximity probe to its Proximitor sensor, transmitting high-frequency eddy-current displacement signals for vibration and shaft position monitoring on critical rotating machinery.
The Bently Nevada 330710-00-060-10-02-00 is a 3300 XL 11 mm Proximity Probe designed for non-contact vibration and position measurement on large, fluid-film bearing machinery. Its 11 mm tip provides a longer linear range compared to the standard 8 mm system, making it ideal for applications requiring greater measurement span, such as axial thrust position, differential expansion, and radial vibration on steam turbines, centrifugal compressors, and large pumps.
The Bently Nevada 330103-00-11-50-02-00 is a 3300 XL 8 mm proximity probe with a metric M10×1 thread and a 5.0-meter integral cable terminated with a miniature coaxial ClickLoc™ connector. This extended-reach configuration features a 110 mm overall case length and connects directly to a Proximitor® sensor without requiring an extension cable for short-run installations.
The Bently Nevada 990-10-XX-01-00 (MOD 165353-01) is a two-wire, loop-powered Vibration Transmitter designed for OEMs of centrifugal air compressors, small pumps, motors, and fans. It accepts input from a 3300 NSv proximity probe and its matching extension cable, conditioning the signal into a 4–20 mA output proportional to peak-to-peak vibration amplitude.
Scan to Wechat :
Scan to WhatsApp :
