New and Original

The GE IS200VCRCH1B is a Discrete Input/Output Board for the GE Speedtronic Mark VI turbine control system, purpose-built to handle large volumes of contact input and relay output signals. It is a core component for safety interlock and auxiliary equipment control in gas and steam turbine applications. As a single-slot alternative to the VCCC board, this module delivers the same functionality while eliminating the daughterboard structure, significantly conserving VME rack space. The front panel integrates cable connectors (J33/J44) and LED status indicators for convenient field wiring and fault diagnosis. The board supports both TMR (Triple Modular Redundant) and simplex system configurations, enabling redundant monitoring of critical protection parameters and control functions.

The GE IS200VAICH1D is a VME Analog Input Board (VAIC) for the GE Speedtronic Mark VI turbine control system. It serves as the primary signal interface for acquiring field sensor data, converting analog signals into high-precision digital data for real-time processing by the main controller. Within the Mark VI architecture, the VAIC board plays a critical role in process monitoring and protection loops for gas and steam turbines, providing high-accuracy acquisition of parameters such as fuel pressure, lube oil pressure, valve position, and flow rates.

The GE IS200TVBAH2ACC is a Vibration Input Terminal Board (TVBA) designed for the GE Speedtronic Mark VI and Mark VIe turbine control systems. It serves as the critical interface between field-mounted vibration sensors and the control system's processing modules, providing signal conditioning, excitation, and termination for high-frequency signals from proximity probes, seismic sensors, accelerometers, and 4–20 mA transmitters used in gas and steam turbine condition monitoring. The "ACC" suffix indicates the board is supplied with conformal coating, providing additional protection against moisture, dust, and corrosive contaminants, making it suitable for harsh environments in power plants and industrial facilities.

The GE IS200EXAMG1B is an Exciter Attenuation Module (EXAM) designed for the EX2100 / EX2100e Excitation Control System and Mark VI Speedtronic platform. It serves as the high-voltage front-end interface for the excitation circuit’s ground detection system . The EXAM module solves a critical engineering challenge: the generator excitation circuit operates at lethal voltages (125 VDC to 1000 VDC), while the ground detection logic circuitry operates at low voltages. The IS200EXAMG1B bridges this gap by attenuating high-voltage signals from the excitation rectifier bridge into precise low-level signals that the IS200EGDM Ground Detector Module can safely process .

The GE IS200TBCIH2CCD is a Contact Input Terminal Board (TBCI) designed for the Speedtronic Mark VI and Mark VIe turbine control systems. Its core function is to serve as the physical interface between field dry-contact devices—such as limit switches, pressure switches, and trip buttons—and the Mark VIe control system. It provides signal conditioning, group isolation, and surge protection for up to 24 discrete dry contact inputs before routing the signals to the associated I/O pack.

The GE IS200ISBBG2AAB is an InSync Bus Bypass Printed Circuit Board (PCB) designed for GE’s EX2100 Excitation Control Systems and Mark VI Speedtronic turbine control platforms. Its core function is to provide a hardware-level bypass channel that maintains critical excitation control data transmission when the main InSync bus is offline for maintenance, faults, or upgrades, ensuring generator excitation regulation remains uninterrupted and the unit can continue operating without load reduction.

The GE IS200JPDDG1AAA is a DC Power Distribution Module (PDM) designed for the Mark VIe Speedtronic turbine control system. Its core function is to receive a single DC input source and distribute it into multiple independently protected output branches, providing isolated and filtered power to critical turbine control components including I/O packs, controllers, and field devices.

The GE IS220UCSAH1A is a high-performance embedded controller module (UCSA) designed for the Mark VIe Speedtronic turbine control system. Its core function is to serve as the central processing unit for gas and steam turbine control, executing critical control logic, managing the I/O network, and coordinating redundant system architectures to ensure safe and reliable turbine operation.

The Yokogawa AIP502 is a V-Net Coupler Module designed for Yokogawa's CENTUM CS and CENTUM VP distributed control systems (DCS). It serves as the communication interface between various components within the V-Net control network, enabling high-speed data exchange between Field Control Units (FCUs), operator stations, and other DCS devices.

The Yokogawa PW482-10 is a dedicated AC input power supply module for the CENTUM VP and CENTUM CS 3000 distributed control systems (DCS). It converts 220–240 VAC plant power into the stabilized DC voltages required by the Field Control Station (FCS) backplane and its associated I/O modules . It is installed in dedicated power supply slots within compatible node units and supports dual-redundant configuration for high availability.

The Yokogawa RB301 is a RIO Bus Interface Master Card designed for Yokogawa's CENTUM VP and CENTUM CS distributed control systems (DCS). It serves as the communication bridge between a host controller (such as a PC or Field Control Unit) and Remote I/O (RIO) devices, enabling high-speed data exchange across distributed process control architectures.

The Yokogawa ADM11T is a 16-point Contact Input Module (Terminal Type) for the CENTUM CS 3000, CENTUM CS 1000, and CENTUM VP distributed control systems (DCS). It is a digital input module designed to acquire binary status signals from field devices such as limit switches, pushbuttons, and relay contacts, and is part of the RIO (Remote I/O) system.