Products

The Bently Nevada 330190-045-01-00 is a 3300 XL Extended Temperature Range (ETR) Extension Cable designed for use in the 3300 XL 8 mm Proximity Transducer System. As a critical component of the signal transmission chain, this cable connects the proximity probe to the Proximitor Sensor, ensuring accurate and reliable transmission of vibration and position measurements in the most demanding industrial environments. The -045 designation indicates a 4.5-meter cable length, while -01 specifies armored construction for superior physical protection . The ETR version features PFA (Perfluoroalkoxy) insulation, enabling continuous operation at temperatures up to +260°C (+500°F)—significantly higher than standard FEP-insulated cables.

The Bently Nevada 3500/42M-05-00 is a four-channel Proximitor/Seismic Monitor designed for the 3500 Series Machinery Protection System. As a key component within the 3500 rack, this module accepts input from proximity and seismic transducers, conditions the signals to provide vibration and position measurements, and compares the conditioned signals against user-programmable alarm setpoints. The 3500/42M serves as the central diagnostic interface for rotating machinery health, protecting critical assets such as steam turbines, centrifugal compressors, and generators by continuously monitoring parameters including radial vibration, thrust position, differential expansion, eccentricity, and velocity. The -05 designation indicates CSA, ATEX, and IECEx hazardous area approvals, making it suitable for installation in classified industrial environments.

The Bently Nevada 330180-X1-05 is a 3300 XL Proximitor Sensor designed for use in industrial proximity transducer systems. As the primary signal conditioning interface, it converts high-frequency eddy current signals generated at the probe tip into a calibrated voltage output directly proportional to the distance between the probe tip and the monitored conductive target . This enables precise measurement of both static (position) and dynamic (vibration) values in rotating machinery. The 3300 XL 8 mm system is Bently Nevada's most advanced eddy current proximity sensor system, fully complying with American Petroleum Institute (API) 670 standards for mechanical construction, linear range, accuracy, and temperature stability . The -X1 designation indicates a 5-meter system length, making this sensor suitable for standard industrial installations requiring moderate cable runs between the probe and the monitoring system.

The Bently Nevada 330130-045-02 is a standard extension cable from the 3300 XL 8 mm Proximity Transducer System. Its core function is to serve as the electrical bridge between a proximity probe and a Proximitor Sensor, extending the connection distance while maintaining signal integrity for precise vibration and position measurements on critical rotating machiner.

The Bently Nevada 3500/50-01-00 is a dual-channel Tachometer Module from the 3500 Machinery Protection System, manufactured by Baker Hughes (Bently Nevada) . Its core function is to measure shaft rotational speed, rotor acceleration, and reverse rotation for critical rotating machinery, comparing measured values against user-programmable alarm setpoints to trigger protective actions.

The Bently Nevada 330980-71-05 is a 3300 XL NSv (Narrow Side View) Proximitor Sensor system designed for precision vibration and position measurement in rotating machinery. Its core function is to provide signal conditioning for 3300 NSv proximity probes, converting the probe's gap voltage signal into a linear DC voltage output proportional to shaft displacement. This system is specifically engineered for space-constrained applications where standard 3300 XL 8mm probes cannot be installed due to counterbore limitations or small target areas. 

The Bently Nevada 330102-00-20-10-02-00 is a high-precision 8 mm eddy current proximity probe from the 3300 XL series, manufactured by Baker Hughes (Bently Nevada). Its core function is to provide non-contact displacement and vibration measurement for critical rotating machinery, including turbines, compressors, and pumps. The probe delivers a voltage output proportional to the distance between the probe tip and a conductive target surface, enabling both static (position) and dynamic (vibration) measurements.  

The Bently Nevada 3500/15 129486-01 is a High Voltage DC Power Supply Module designed for the 3500 Series Machinery Protection System. As a half-height module installed in the left-side designated slots of the 3500 rack, this power supply accepts a wide range of DC input voltages and converts them to voltages acceptable for use by other 3500 modules, ensuring reliable operation of vibration, temperature, speed, and Keyphasor monitoring functions. The 129486-01 is part of the Legacy High Voltage DC Power Supply series, designed specifically for applications requiring 88 to 140 VDC input power. Its robust design supports full-rack operation with options for redundancy, ensuring uninterrupted performance in critical industrial applications.

The Bently Nevada 330850-51-00 is a high-performance Proximitor® sensor from the 3300 XL 25 mm proximity transducer system series. This signal conditioning unit serves as the interface between a 25 mm eddy current proximity probe and your machinery monitoring system, converting raw probe signals into a precise, linear voltage output proportional to the distance between the probe tip and the target surface . Unlike standard 8 mm systems with limited range, the 25 mm system is specifically engineered for long-range displacement measurements required in large rotating machinery applications such as steam turbines, axial compressors, and generators.

The Bently Nevada 330881-16-00-115-01-02 is a PROXPAC XL Proximity Transducer, an integrated, self-contained proximity probe system that combines the probe, extension cable, and Proximitor® sensor into a single, factory-matched assembly . Unlike traditional separate-component systems, this design eliminates the need for a separate extension cable between the probe and its associated Proximitor sensor, simplifying installation and improving system reliability . The "PROXPAC XL" housing is made of Polyphenylene Sulfide (PPS), a durable molded thermoplastic that replaces the steel and aluminum used in earlier housings. The material incorporates glass and conductive fibers to strengthen the housing and effectively dissipate electrostatic charges . This assembly is designed for non-contact vibration and displacement monitoring of rotating machinery such as turbines, compressors, pumps, and generator.

330878-51-05| Bently Nevada |3300 XL Proximitor Sensor

330180-90-05| Bently Nevada |3300 XL Proximitor Sensor