Products

The Bently Nevada 330103-00-13-05-02-00 is an 8 mm proximity probe from the industry-standard 3300 XL series, engineered for precise non-contact measurement of static (position) and dynamic (vibration) displacement in rotating machinery . It is the M10 × 1 metric-threaded, unarmored variant with a 130 mm extended case length, designed for deep-seated shafts and structural clearances where standard-length probes cannot reach . This probe is part of the 3300 XL proximity transducer system, which consists of a probe, an extension cable, and a Proximitor® sensor. All system components are fully interchangeable without the need for matching or bench calibration, provided the total system length is maintained .

The Bently Nevada 330103-00-05-10-11-05 is a hazardous-area certified 8 mm proximity probe from the industry-standard 3300 XL series. It is the M10 × 1 metric-threaded, compact variant with a FluidLoc chemical-resistant cable, specifically engineered for installation in confined spaces within explosive atmospheres . This probe is part of the 3300 XL proximity transducer system, which consists of a probe, an extension cable, and a Proximitor® sensor. All system components are fully interchangeable without the need for matching or bench calibration, provided the total system length is maintained .

The Bently Nevada 330101-00-38-90-02-00 is an 8 mm proximity probe from the industry-standard 3300 XL series, engineered for precise non-contact measurement of static (position) and dynamic (vibration) displacement in rotating machinery . It is the 3/8-24 UNF threaded, unarmored variant with a 9.0 meter total length, designed for reliable installation in fluid-film bearing machines such as steam turbines, centrifugal compressors, and high-speed gearboxes . This probe is part of the 3300 XL proximity transducer system, which consists of a probe, an extension cable, and a Proximitor® sensor. All system components are fully interchangeable without the need for matching or bench calibration, provided the total system length is maintained .

The Bently Nevada 74712-06-05-03-00 is a high-temperature, two-wire Seismoprobe® velocity transducer designed for absolute vibration measurement on bearing housings, machine casings, and structural components in demanding thermal environments . It is the high-temperature version of the industry-standard 9200 Seismoprobe, specifically engineered for gas turbines, steam turbines, and compressors where standard vibration sensors cannot survive . Using proven moving-coil technology, this passive transducer generates a voltage output directly proportional to vibration velocity—requiring no external power supply . This design makes it ideal for both continuous machinery protection and portable diagnostic measurements .  

The Bently Nevada 330101-00-16-10-02-00 is an 8 mm proximity probe from the industry-standard 3300 XL series, engineered for precise non-contact measurement of static (position) and dynamic (vibration) displacement in rotating machinery. It is the 3/8-24 UNF threaded variant without armor, designed for reliable installation in fluid-film bearing machines such as steam turbines, centrifugal compressors, and high-speed gearboxes. This probe is part of the 3300 XL proximity transducer system, which consists of a probe, an extension cable, and a Proximitor® sensor. All system components are fully interchangeable without the need for matching or bench calibration, provided the total system length is maintained.

The Bently Nevada 330104-12-20-10-02-00 is an 8 mm proximity probe from the industry-standard 3300 XL series, engineered for precise non-contact measurement of static (position) and dynamic (vibration) displacement in rotating machinery. It is the M10 × 1 metric-threaded, armored variant with an extended unthreaded length, designed for durable installation in fluid-film bearing machines such as steam turbines, centrifugal compressors, and high-speed gearboxes. This probe is part of the 3300 XL proximity transducer system, which consists of a probe, an extension cable, and a Proximitor® sensor. All system components are fully interchangeable without the need for matching or bench calibration, provided the total system length is maintained.

The Bently Nevada 330104-10-19-10-02-00 is an 8 mm proximity probe from the industry-standard 3300 XL series, engineered for precise non-contact measurement of static (position) and dynamic (vibration) displacement in rotating machinery . It is the M10 × 1 metric-threaded, armored variant with an extended unthreaded length, designed for durable installation in fluid-film bearing machines such as steam turbines, centrifugal compressors, and high-speed gearboxes. This probe is part of the 3300 XL proximity transducer system, which consists of a probe, an extension cable, and a Proximitor® sensor. All system components are fully interchangeable without the need for matching or bench calibration, provided the total system length is maintained .

The Bently Nevada 330104-08-16-10-02-00 is an 8 mm proximity probe from the industry-standard 3300 XL series, engineered for precise non-contact measurement of static (position) and dynamic (vibration) displacement in rotating machinery . It is the M10 × 1 metric-threaded, armored variant of the 3300 XL 8 mm probe family, designed for durable installation in fluid-film bearing machines such as steam turbines, centrifugal compressors, and high-speed gearboxes. This probe is part of the 3300 XL proximity transducer system, which consists of a probe, an extension cable, and a Proximitor® sensor. All system components are fully interchangeable without the need for matching or bench calibration, provided the total system length is maintained .

The Bently Nevada 330130-080-01-00 is a standard extension cable from the industry-standard 3300 XL series, designed to connect proximity probes to Proximitor® sensors in machinery protection and condition monitoring systems. This 8.0-meter cable features stainless steel armor (Option 01) for enhanced mechanical protection in harsh industrial environments . The 3300 XL system is renowned for its modular interchangeability: probes, extension cables, and Proximitor sensors can be mixed and matched without bench calibration, provided the total electrical length is maintained . This extension cable is a critical link in that signal chain, ensuring accurate transmission of eddy-current displacement measurements for shaft vibration and axial position monitoring.

The Bently Nevada 330104-06-12-10-02-00 is an 8 mm proximity probe from the industry-standard 3300 XL series. It is engineered to provide precise, non-contact measurement of static (position) and dynamic (vibration) displacement of rotating machinery components, such as shafts in turbines, compressors, and pumps . This specific part number features a 1.0 meter (3.3 ft) total length, an M10 × 1 metric thread, and is supplied with stainless steel armor on the cable for mechanical protection in harsh industrial environments . The 3300 XL system is renowned for its modularity: probes, extension cables, and Proximitor sensors are fully interchangeable without the need for matching or bench calibration, simplifying installation and reducing spare parts inventory .

The Bently Nevada 3500/20-01-02-00 is a Rack Interface Module (RIM) designed for the 3500 Series Machinery Protection System. As the primary communication interface for the rack, this module manages configuration, data retrieval, and communication between the 3500 monitoring system and external host software or control systems. The -01-02-00 configuration indicates specific options for this RIM variant. The module must be installed in slot 1 of the 3500 rack, directly adjacent to the power supply modules . While it does not participate in the critical monitoring signal path, the 3500/20 is essential for overall system functionality, enabling rack configuration and retrieval of machinery data for external systems .

The Bently Nevada 330190-035-00-00 is a 3300 XL Extended Temperature Range (ETR) Extension Cable designed for use in the 3300 XL 8 mm Proximity Transducer System. As a critical component of the signal transmission chain, this cable connects the proximity probe to the Proximitor Sensor, ensuring accurate and reliable transmission of vibration and position measurements in demanding industrial environments. The -035 designation indicates a 3.5-meter cable length, while -00 specifies standard (non-armored) construction. The -00 suffix at the end indicates no specific agency approval is required for this configuration.