Products

The Schneider Electric LC1D32M7C is a 3-pole (3NO) AC-controlled contactor from the TeSys D series, designed for reliable motor control and resistive load switching in industrial applications. Rated at 32A (AC-3) and featuring a 220V AC 50/60Hz coil, it is a versatile component suitable for a wide range of automation and motor control systems. Its robust design, compact footprint, and multiple international certifications make it a trusted choice globally.

XS4P08PA370 Inductive proximity sensors XS, inductive sensor XS4 M8

The Schneider Electric XS4P18PB370 is an inductive proximity sensor from the Telemecanique Sensors OsiSense XS series. This cylindrical M18 sensor is engineered for non-contact detection of metal objects in general-purpose industrial automation applications. Featuring an all-plastic PPS (Polyphenylene Sulfide) housing with an 8mm sensing range, it offers a 3-wire DC PNP output with normally closed (NC) function . The sensor provides reliable performance across a wide operating temperature range and is backed by an 18-month warranty . Important Status Note: This model has reached its End of Commercialization status. The variant XS4P18PB370D (M12 connector version) and other variants remain available as active products.

The Schneider Electric XS630B1MBL2 is a high-performance inductive proximity sensor from the Telemecanique Sensors OsiSense XS series. This general-purpose cylindrical sensor is designed for the non-contact detection of metal objects in demanding industrial environments. With a robust nickel-plated brass housing and exceptional ingress protection, it offers reliable performance with a long operational life, as it contains no moving parts.  

The Schneider Electric LT4760M7S is a high-performance electronic overcurrent relay from the trusted TeSys LT47 series. Designed to provide precise protection for three-phase AC motors, this manual reset relay is ideal for safeguarding equipment against overloads, phase failure, and mechanical jamming. As part of Schneider Electric's renowned motor control portfolio, it offers simple setup and robust performance for a wide array of industrial applications.

The Schneider Electric TCSESU083FN0 is an industrial-grade, unmanaged Ethernet switch from the ConneXium product family . Designed for reliable and straightforward network connectivity in industrial automation environments, this 8-port switch delivers plug-and-play performance for systems that demand dependable Ethernet communication without complex configuration . It is part of the Transparent Ready concept, enabling seamless integration with Modicon PLCs and SCADA networks.

The Schneider Electric XUB0APSNM12 is a versatile, multimode photoelectric sensor from the renowned OsiSense XU series. Engineered for general-purpose industrial automation, this cylindrical M18 sensor offers exceptional flexibility with four distinct detection modes in a single unit . Part of Telemecanique Sensors' offering, it leverages Osiconcept technology to deliver reliable, high-performance object detection across a wide range of applications and harsh environmental conditions.

The Foxboro P0960HA is a module from the Foxboro I/A Series distributed control system (DCS), now part of Schneider Electric (formerly Invensys). The I/A Series is widely used in process industries such as refining, petrochemicals, chemicals, and power generation. Based on the part number series (P0960xx), it belongs to a different module family than the P0400xx, P0700xx, P0900xx, P0914xx, P0916xx, P0917xx, P0922xx, and P0926xx series discussed previously. The exact module type and function must be confirmed against official Foxboro/Schneider Electric documentation.

The Foxboro P0926GH is a module from the Foxboro I/A Series distributed control system (DCS), now part of Schneider Electric (formerly Invensys). The I/A Series is widely used in process industries such as refining, petrochemicals, chemicals, and power generation. Based on the part number series (P0926xx), it belongs to the same module family as the P0926GG, P0926GU, P0926GV, P0926GW, and P0926GX discussed previously. The exact module type and function must be confirmed against official Foxboro/Schneider Electric documentation.

The Foxboro FBM214 and P0922VT are associated components from the Foxboro I/A Series distributed control system (DCS), now part of Schneider Electric (formerly Invensys). The FBM214 is an analog input module in the FBM (Field Bus Module) family, and the P0922VT is typically a termination assembly or related interface component used with the module for field wiring. The exact relationship and specifications must be confirmed against official Foxboro/Schneider Electric documentation.

The Foxboro FBM207 is a Discrete Input Module from the Foxboro I/A Series distributed control system (DCS), now part of Schneider Electric (formerly Invensys). It belongs to the FBM (Field Bus Module) family, which provides field I/O functions within the I/A Series architecture. The FBM207 is a discrete (digital) input module used to acquire binary field signals. The exact specifications must be confirmed against official Foxboro/Schneider Electric documentation.

The Foxboro P0916AL is a module from the Foxboro I/A Series distributed control system (DCS), now part of Schneider Electric (formerly Invensys). The I/A Series is widely used in process industries such as refining, petrochemicals, chemicals, and power generation. Based on the part number series (P0916xx), it belongs to the same module family as the P0916RH discussed previously. The exact module type and function must be confirmed against official Foxboro/Schneider Electric documentation.