Products

The Beckhoff EL3024 is a 4-channel analog input terminal for the EtherCAT I/O system. Based on the Beckhoff naming convention, the "EL" prefix indicates an EtherCAT terminal, and "3024" identifies the analog input function and channel configuration. It provides analog signal acquisition for process transmitters, connected to the EtherCAT network via the terminal bus.

The Beckhoff EL3154 is a 4-channel analog input terminal for the EtherCAT I/O system. Based on the Beckhoff naming convention, the "EL" prefix indicates an EtherCAT terminal, and "3154" identifies the analog input function and channel configuration. It provides analog signal acquisition for process transmitters, connected to the EtherCAT network via the terminal bus.  

The EL2535-0002 output terminals are specially designed for the precise control of single and double-coil proportional valves and proportional solenoid valves. They regulate the output current through pulse width modulation (PWM) of the supply voltage and are electrically isolated from the E-bus. The current values (0 to maximum output current) are specified by the automation device through a 16-bit value. The output stages are protected against overload and short circuit. Each EtherCAT pulse width current terminal contains two channels whose signal state is indicated by LEDs. The light emitting diodes simplify local diagnosis by displaying typical load and wiring faults.

The Beckhoff EL3314 is a 4-channel analog input terminal for the EtherCAT I/O system. Based on the Beckhoff naming convention, the "EL" prefix indicates an EtherCAT terminal, and "3314" identifies the analog input function and channel configuration. It provides analog signal acquisition for process transmitters, connected to the EtherCAT network via the terminal bus.

The Beckhoff EL5101 is a 1-channel incremental encoder interface terminal for the EtherCAT I/O system. Based on the Beckhoff naming convention, the "EL" prefix indicates an EtherCAT terminal, and "5101" identifies the encoder interface function and channel configuration. It provides high-speed position and speed feedback from incremental encoders, connected to the EtherCAT network via the terminal bus.

The Beckhoff EL4134 is a 4-channel analog output terminal for the EtherCAT I/O system. Based on the Beckhoff naming convention, the "EL" prefix indicates an EtherCAT terminal, and "4134" identifies the analog output function and channel configuration. It provides analog output signals for controlling valves, actuators, and other analog field devices, connected to the EtherCAT network via the terminal bus.

The Beckhoff EL9010 is an end cap for the EtherCAT terminal system. Based on the Beckhoff naming convention, the "EL" prefix indicates an EtherCAT terminal accessory, and "9010" identifies the specific end cap configuration. It is used at the end of an EtherCAT terminal block to terminate the terminal bus and protect the last terminal in the chain.

The Beckhoff EL2809 is a 16-channel digital output terminal for the EtherCAT I/O system. Based on the Beckhoff naming convention, the "EL" prefix indicates an EtherCAT terminal, and "2809" identifies the digital output function and channel count. It provides 24 V DC digital output switching for field devices, connected to the EtherCAT network via the terminal bus.

The Beckhoff EL1008 is an 8-channel digital input terminal for the EtherCAT I/O system. Based on the Beckhoff naming convention, the "EL" prefix indicates an EtherCAT terminal, and "1008" identifies the digital input function and channel count. It provides 24 V DC digital input acquisition for field devices, connected to the EtherCAT network via the terminal bus.

The Beckhoff EL2008 is an 8-channel digital output terminal for the EtherCAT I/O system. Based on the Beckhoff naming convention, the "EL" prefix indicates an EtherCAT terminal, "2008" identifies the digital output function and channel count. It provides 24 V DC digital output switching for field devices, connected to the EtherCAT network via the terminal bus.

The Honeywell 51303982-200 is a Process Manager (PM) control board used in the classic Honeywell TDC 3000 Distributed Control System (DCS). As this component is part of an industrial legacy system within the field of industrial automation.

The Honeywell 51303976-400 is a communications card/module designed for the Honeywell Process Manager control section.