Products

The EL4011 is a single-channel analog output terminal from the Beckhoff EtherCAT Terminal series, designed for output of standard current-loop signals (0–20 mA or 4–20 mA). It converts digital values from the controller into an analog current output for controlling actuators, valves, drives, and other devices that accept a current-loop control signal. It is a compact, cost-effective solution for single-channel current-loop output in machine building and process automation.

The EL4008 is an eight-channel analog output terminal from the Beckhoff EtherCAT Terminal series, designed for output of standard 0–10 V voltage signals. It converts digital values from the controller into eight independent analog voltage outputs for controlling actuators, valves, drives, and other devices that accept a 0–10 V control signal. It is a high-density solution for multi-channel analog voltage output in machine building, process automation, and test equipment.

The EL4004 is a four-channel analog output terminal from the Beckhoff EtherCAT Terminal series, designed for output of standard 0–10 V voltage signals. It converts digital values from the controller into four independent analog voltage outputs for controlling actuators, valves, drives, and other devices that accept a 0–10 V control signal. It is a compact, high-density solution for multi-channel analog voltage output in machine building and process automation.

The EL4002 is a two-channel analog output terminal from the Beckhoff EtherCAT Terminal series, designed for output of standard 0–10 V voltage signals. It converts digital values from the controller into two independent analog voltage outputs for controlling actuators, valves, drives, and other devices that accept a 0–10 V control signal. It is a compact solution for dual-channel analog voltage output in machine building and process automation.

The EL4001 is a single-channel analog output terminal from the Beckhoff EtherCAT Terminal series, designed for output of standard 0–10 V voltage signals. It converts digital values from the controller into an analog voltage output for controlling actuators, valves, drives, and other devices that accept a 0–10 V control signal. It is a compact, cost-effective solution for single-channel analog voltage output in machine building and process automation.

The EL3773 is a three-phase power measurement terminal from the Beckhoff EtherCAT Terminal series with oversampling capability, designed for high-speed, detailed analysis of electrical power in three-phase AC systems. It measures voltage and current on all three phases with a high sampling rate and transmits multiple sampled values per EtherCAT bus cycle, enabling precise analysis of harmonics, transients, and dynamic load behavior. It is suited for power quality analysis, drive testing, and advanced energy monitoring.

The EL3742 is a two-channel analog input terminal from the Beckhoff EtherCAT Terminal series, designed for high-speed acquisition of current-loop signals using oversampling. Each channel measures 0–20 mA or 4–20 mA current signals and samples them at a much higher rate than the EtherCAT bus cycle, transmitting multiple sampled values per bus cycle to the controller. It enables precise capture of fast current transients and dynamic current-loop signals in test benches, drive systems, and high-dynamic process measurement.

The EL3702 is a two-channel analog input terminal from the Beckhoff EtherCAT Terminal series, designed for high-speed acquisition of ±10 V signals using oversampling. It samples the input signals at a much higher rate than the EtherCAT bus cycle and transmits multiple sampled values per bus cycle to the controller, enabling precise capture of fast transient signals and high-frequency waveforms. It is commonly used for vibration analysis, transient recording, and high-dynamic measurement tasks.

The EL3692 is a two-channel resistance measurement terminal from the Beckhoff EtherCAT Terminal series, designed for direct measurement of electrical resistance in the EtherCAT I/O system. Each channel measures resistance over multiple ranges with high resolution, making it suitable for automated testing of resistive components, contacts, heating elements, and sensor elements. It is commonly used in test benches, automated production testing, and quality inspection.

The EL3681 is a single-channel digital multimeter terminal from the Beckhoff EtherCAT Terminal series, designed for direct measurement of voltage, current, resistance, and other electrical quantities within the EtherCAT I/O system. It integrates a full digital multimeter function into a standard 12 mm EtherCAT terminal, enabling automated electrical measurement, test, and calibration tasks directly from the controller. It is commonly used in test benches, automated production testing, and diagnostic applications.

The EL3632 is a two-channel analog input terminal from the Beckhoff EtherCAT Terminal series, specifically designed for direct connection of IEPE (Integrated Electronics Piezo-Electric) sensors — also known as piezoelectric accelerometers or vibration sensors. It supplies the constant current required by IEPE sensors and measures the dynamic AC signal for vibration monitoring, condition monitoring, and structural analysis. It is a specialized terminal for predictive maintenance and machine diagnostics.

The EL3612 is a two-channel high-precision analog input terminal from the Beckhoff EtherCAT Terminal series, designed for measurement of current-loop signals. Each channel is configured for 0–20 mA or 4–20 mA current input, making it a dedicated solution for standard industrial current-loop transmitters. It is commonly used for sensor and transducer signal acquisition in machine building, process automation, and test equipment.