Products

4 analog outputs ±10 V Integrated enable relay for initial phase Very short cycle times Optimal shield grounding on all channels The module is equipped with 4 inputs with 12-bit digital converter resolution. The output signal range is ±10 V.

The B&R X67PS1300 is a power supply module for the B&R X67 IP67 field I/O system. Based on the X67 naming convention, the "PS" prefix indicates a power supply module, and "1300" identifies the specific input/output configuration and power rating. It provides power to the X67 field I/O modules in an IP67-rated package for direct machine-mounted installation.

The bus module is the base for all X20 supply modules For creating voltage groups The internal I/O supply is isolated to the left Manual node number assignment Independent of electronics module Manual and automatic addressing can be combined as desired The BM05 bus module is the base for all X20 supply modules. This bus module is also used to determine a unique address using node number switches.  

The X20CP0201 is the entry-level X20 Compact CPU. This CPU is used when a cycle time of 2 ms (typ. 5 ms) is sufficient and the cost/performance ratio is a key factor. Going without an onboard Ethernet interface additionally reduces costs for the X20CP0201.

The X20CP3486 is a high-performance CPU for the X20 System. This CPU can be used anywhere from high-end applications in machine manufacturing to demanding tasks in process control. Ethernet and USB are onboard. In addition, the CPU has a POWERLINK connection for real-time communication. There are also three multi-purpose slots for additional interface modules.

The B&R X20BC0053 from B&R Industrial Automation identifies this component as a remote I/O bus controller for the X20 cabinet I/O series featuring DeviceNet communication capability and ATEX compliance for hazardous zones.

This bus controller makes it possible to connect up to 253 X2X Link I/O modules to CANopen. A transition between IP20 and IP67 protection is possible by directly connecting X20, X67 or XV modules to one another at distances of up to 100 m each across control cabinet boundaries as required. All CANopen operating modes such as synchronous, event and polling are supported as well as PDO linking, life/node guarding, heartbeat, emergency objects and much more.

The B&R X20IF1063 is an interface module for the B&R X20 modular I/O system. Based on the X20 naming convention, the "IF" prefix indicates an interface module, and "1063" identifies the specific communication protocol and configuration. It provides a communication interface for connecting the X20 system to external networks or devices.

The B&R X20IF1091 is an interface module for the B&R X20 modular I/O system. Based on the X20 naming convention, the "IF" prefix indicates an interface module, and "1091" identifies the specific communication protocol and configuration. It provides a communication interface for connecting the X20 system to external networks or devices.

The B&R X20IF1020 is an interface module for the B&R X20 modular I/O system. Based on the X20 naming convention, the "IF" prefix indicates an interface module, and "1020" identifies the specific communication protocol and configuration. It provides a communication interface for connecting the X20 system to external networks or devices.

The B&R X20CS1020 is a serial interface module for the B&R X20 modular I/O system. Based on the X20 naming convention, the "CS" prefix indicates a communication/serial interface module, and "1020" identifies the specific interface configuration. It provides serial communication ports for connecting the X20 system to external serial devices.  

SafeLOGIC controllers handle all central tasks within a safety-related application. Three different functional areas exist here. The configuration management system monitors the entire safety-related configuration of the application. When replacements are needed, the parameter management system makes sure that newly installed modules are assigned correct parameters that apply to the application. Lastly, SafeLOGIC handles the actual safety-related execution of the application program.