Products

The Honeywell MP-ZKSDR5-100 is identified as a K4SDR-16 Upgrade Kit associated with Honeywell TDC3000/TPS system spare parts. 

The Honeywell 51401291-100 is a Low Power LCN (LLCN) Network Interface Board for the Honeywell TDC 3000 distributed control system. It was used in early versions of the Universal Station to provide communication interface for the Low Power Local Control Network, prior to the introduction of the K2LCN and K4LCN combined processor/LAN interface/memory boards.

The Honeywell 51108899-100 is an LCNFL Paddle Board for the Honeywell TDC 2000/TDC 3000 distributed control system. It enables a single remote node (such as a Universal Station) to connect to the Local Control Network (LCN) over fiber optic cable. At the remote end, it replaces both the LCNE/LCNE2 paddle board and the LCN I/O paddle board, working in conjunction with LCNE or LCNE2 boards at the non-remote end.

The Honeywell 51304540-100 is an LCNE2 Paddle Board for the Honeywell TDC 3000 distributed control system. It extends the Local Control Network (LCN) to remote locations using fiber optic cable, supporting high-speed, reliable communication over long distances. It has been replaced by the newer XLCNE2 model.

The Honeywell 51305508-100 is an XLCNE2 LCN Extender Paddle Board for the Honeywell TDC 3000 distributed control system. It serves as a fiber-optic interface that extends the Local Control Network (LCN) backbone over multimode fiber, using ST-type connectors to link remote I/O segments while maintaining high-speed, deterministic communication.

The Honeywell 51304685-250 is an R300 Advanced Communication Module / Communication PWA (Printed Wiring Assembly) for the Honeywell TDC 3000 and Experion PKS distributed control systems. It serves as a high-speed data interface handling communication between process controllers, I/O modules, and the supervisory control network, and features conformal coating (CONFM) for protection against moisture, dust, and corrosive industrial atmospheres.

The Honeywell 51303979-200 is identified in third-party listings as a PM I/O Link Extender (R210) for the Honeywell TDC 3000/TPS Process Manager system.

The Honeywell 51303982-400 is a Control Module for the Honeywell TDC 3000/TPS Process Manager (PM) system, identified as one of the five modules making up the PM control section. It is also described in some sources as a UCN Control Mainboard within the Universal Control Network family.

The Honeywell 51304163-100 is a UCN (Universal Control Network) Modem Module for the Honeywell TDC 3000/TPS distributed control system, specifically identified as one of the five modules making up the PM (Process Manager) control section . Honeywell has discontinued this module.

The Honeywell 51401635-150 is a High-Performance Communication/Control Card for the Honeywell High-Performance Process Manager (HPM) within TDC 3000/UCN-based control systems. It combines the communication processor, control processor, memory, redundancy interface, and UCN interface connection required by the HPM card set.

The Honeywell 51402573-150 is an HPM UCN Interface Module for the Honeywell TDC 3000/TPS distributed control system. It provides high-speed communication between the High-Performance Process Manager (HPM) and the Universal Control Network (UCN).

The Honeywell 51303947-100 is a PNM Paddleboard Assembly, also referred to as a PNI Paddle Card for the Honeywell TDC 3000 distributed control system. It provides the cable connectors for the UCN (Universal Control Network).