Stock New Original ABB DSQC 679 3HAC028357-001

Product Details

Related Product Model Recommendations

FAQs

Q1: What is the primary function of the DSQC 679?

It is the primary human-machine interface for ABB IRC5 robot controllers. It enables operators to program RAPID code, jog the robot manually, monitor production statistics, and configure I/O — all through the touchscreen and physical controls.

Q2: Can the DSQC 679 be used with an older S4C+ controller?

No. The DSQC 679 (3HAC028357-001) is specifically designed for the IRC5 control architecture. Older S4C+ systems require different hardware, such as the DSQC 540.

Q3: What is the minimum RobotWare version required?

The DSQC 679 requires RobotWare 5.07.02 or higher for full functionality. Using an older RobotWare version may result in a “Version mismatch” error, where the pendant powers on but cannot communicate with the controller.

Q4: What is the difference between the DSQC 679 and the DSQC 1000?

The DSQC 679 is the standard pendant for IRC5 and IRC5C controllers. The DSQC 1000 (3HAC050856-001) is the newer pendant designed for the OmniCore controller generation. They are not interchangeable.

Q5: What should I check if the FlexPendant is stuck on booting?

Try holding the Stop button + Programmable Key 1 (and a hold-to-run button if present) during power-up to reload the image on the TPU. If this fails, the flash disk in the controller may be corrupt and require ABB service.