The Bently Nevada 330180-91-05 is a High-Temperature Proximity Probe System, specifically part of the 3300 XL 8mm Proximity Probe Series. It is a pre-configured system consisting of a high-temperature probe, a 5-meter extension cable, and an 8mm proximity sensor designed for vibration monitoring in high-temperature environments.
Item No :
330180-91-05Order(MOQ) :
1Payment :
EXW/CIFProduct Origin :
USAShipping Port :
WuhanLead Time :
3-5daysWeight :
2kg| Parameter | Specification |
|---|---|
| Manufacturer | Bently Nevada (GE Measurement & Control) |
| Product Number | 330180-91-05 |
| Product Type | High-Temperature Proximity Probe System |
| Series | 3300 XL 8mm Proximity Probe System |
| Included Components | Probe, 5-meter Extension Cable, 8mm Proximitor Sensor |
| System Length | 5 meters (probe + extension cable) |
| Probe Tip Temp Range | -35°C to +177°C (-31°F to +350°F) |
| Probe Cable Temp Range | -35°C to +177°C (-31°F to +350°F) |
| System Length Temperature Range | -35°C to +100°C (-31°F to +212°F) (extension cable and connectors) |
| Connector/Probe Type | 3300 XL 8mm with high-temperature PEEK connector |
| Cable Type | Armor-Gard / FluidLoc (hermetic seal option) |
| Compatible Proximitor | 3300 XL 8mm Proximitor Sensor |
| Case Material | 316 series stainless steel (case), PPS (probe tip) |
| Target Material | 4140 steel / AISI 4140 |
| ATEX Approval | Not certified as a safety component for explosive atmospheres |
| Lifecycle Status | Active / Available (legacy support) |
| Model | Description | Application / Notes |
|---|---|---|
| 330180-91-05 | High-Temperature Probe System (5m, +350°F) | For high-temperature environments (+177°C) |
| 330180-50-00 | Standard Probe System (5m, standard temp) | For standard temperature environments (-51°C to +121°C) |
| 330180-X1-XX | Standard Probe System | Alternative standard probe configurations |
| 3300 XL 5m Extension Cable | Extension Cable | Optional replacement cable for 5m system |
| 3300 XL 8mm Proximitor Sensor | Proximitor Sensor | Driver module for the probe system |
| 3300 XL 8mm Probe | Replacement Probe | High-temperature probe replacement (without extension cable) |
| 330701-00-06-00-02-00 | 3300 XL Extension Cable | 5m extension cable (Armor-Gard), BNC connectors |
1. What is the 330180-91-05 and what does it measure?
The 330180-91-05 is a high-temperature proximity probe system used for non-contact displacement and vibration measurements in rotating machinery. It measures the distance between the probe tip and the machine shaft surface, providing critical data for radial vibration, axial position (thrust), and eccentricity monitoring .
2. What is the temperature limit of this probe?
This system is rated for probe tip and cable temperatures up to +177°C (+350°F) . It is built with high-temperature PEEK connectors and specialized cable insulation to maintain accuracy and reliability in harsh industrial environments .
3. What is the system length and what components are included?
The system is 5 meters in total length, comprising a probe, a 5-meter extension cable, and a compatible Proximitor sensor . The system is pre-configured and certified for high-temperature operation.
4. What is the difference between this system and standard probe systems?
The 330180-91-05 uses a high-temperature PEEK connector and Armor-Gard cable rated for +177°C, whereas standard 3300 XL systems are typically rated to +121°C . This makes it suitable for gas turbines, compressors, and pumps in high-heat applications where standard probes would fail.
5. What target materials are compatible with this probe?
Bently Nevada recommends using AISI 4140 steel as the target material for calibration. The probe's linear range and sensitivity are specified for this material . The probe provides a 2 mm linear range (approx. 50–250 mils) with sensitivity of 3.94 V/mm (100 mV/mil).
The Bently Nevada 330105-02-12-05-02-00 is an 8 mm reverse-mount proximity probe from the 3300 XL series, engineered for non-contact vibration and position monitoring in space-constrained machinery.
The Bently Nevada 330130-085-00-00 is an 8.5-meter standard extension cable for the 3300 XL 8 mm Proximity Transducer System. It connects a 3300 XL proximity probe to its Proximitor® sensor, transmitting eddy-current displacement signals for vibration, axial position, and Keyphasor measurements on critical rotating machinery.
The Bently Nevada 21000-00-00-15-030-04-00 is a Proximity Probe Housing Assembly from the 21000 series, designed to provide a secure, environmentally sealed mounting interface for reverse-mount proximity probes on critical rotating machinery.
The Bently Nevada 330780-50-00 is a 5.0-meter Proximitor® Sensor for the 3300 XL 11 mm Proximity Transducer System. It receives signals from a 3300 XL 11 mm probe and its extension cable, conditioning them into a linear voltage output proportional to shaft displacement for radial vibration, axial thrust position, and Keyphasor measurement.
The Bently Nevada 21747-040-00 is a 4-meter Proximitor probe extension cable designed for the 3300 and 7200 Series Proximity Transducer Systems. It connects a proximity probe to its Proximitor sensor, transmitting high-frequency eddy-current displacement signals for vibration and shaft position monitoring on critical rotating machinery.
The Bently Nevada 330710-00-060-10-02-00 is a 3300 XL 11 mm Proximity Probe designed for non-contact vibration and position measurement on large, fluid-film bearing machinery. Its 11 mm tip provides a longer linear range compared to the standard 8 mm system, making it ideal for applications requiring greater measurement span, such as axial thrust position, differential expansion, and radial vibration on steam turbines, centrifugal compressors, and large pumps.
The Bently Nevada 330103-00-11-50-02-00 is a 3300 XL 8 mm proximity probe with a metric M10×1 thread and a 5.0-meter integral cable terminated with a miniature coaxial ClickLoc™ connector. This extended-reach configuration features a 110 mm overall case length and connects directly to a Proximitor® sensor without requiring an extension cable for short-run installations.
The Bently Nevada 990-10-XX-01-00 (MOD 165353-01) is a two-wire, loop-powered Vibration Transmitter designed for OEMs of centrifugal air compressors, small pumps, motors, and fans. It accepts input from a 3300 NSv proximity probe and its matching extension cable, conditioning the signal into a 4–20 mA output proportional to peak-to-peak vibration amplitude.
Scan to Wechat :
Scan to WhatsApp :
