YOKOGAWA CENTUM VP

The YOKOGAWA ASI533-H is the HART-enabled variant of the ASI533 analog output module with a built-in barrier, designed for the CENTUM VP distributed control system. The "-H" suffix indicates it supports HART digital communication, allowing remote monitoring and configuration of connected HART field devices (such as valve positioners) alongside the standard 4–20 mA analog output signal.

The YOKOGAWA ASI533-S is a standard-type analog output module with a built-in barrier for the CENTUM VP distributed control system. The "-S" suffix indicates it is the standard version without HART communication (the "-H" variant provides HART).

The YOKOGAWA APM11 is a pulse input module for the CENTUM CS and CENTUM VP distributed control systems. It converts contact closures, voltage pulses, and current pulses into signals usable by the control system, and is commonly used for flow measurement and high-speed counting applications.

The YOKOGAWA ASI133-S is an 8-channel isolated analog input module with a built-in barrier for the CENTUM VP / CS 3000 distributed control system. It accepts 4–20 mA DC signals from field transmitters, with the integrated barrier enabling direct connection to intrinsically safe field devices in hazardous areas.

The YOKOGAWA ADV569 is a 64-channel digital output module for the CENTUM VP / CS 3000 distributed control system, compatible with the ST7 standard. It uses transistor contact outputs (current sink) for driving field devices such as relays, solenoids, and indicators, and supports status, pulse-width, and time-proportional output functions.

The YOKOGAWA ADV559 is a 32-channel digital output module for the CENTUM VP distributed control system, specifically designed as a ST4-compatible replacement for the legacy ADM51T/ADM51C modules in RIO system upgrades.

The YOKOGAWA ADV561 is a 64-channel digital output module for the CENTUM VP / CS 3000 distributed control system, featuring 24 V DC transistor outputs with a current sink format.

The YOKOGAWA AAV542 is a 16-channel analog output module for the CENTUM VP / CS 3000 distributed control system, used to output voltage signals to field devices such as actuators and valves.

The YOKOGAWA ADV551 is a 32-channel digital output module for the CENTUM VP / CS 3000 distributed control system. It outputs 24 V DC transistor contact signals and supports pulse width output and time-proportional output functions (with the "-P" suffix).

The YOKOGAWA ADV151 is a 32-channel digital input module for the CENTUM VP / CS 3000 distributed control system. It receives 24 V DC ON/OFF signals from field devices and supports status monitoring, pushbutton edge counting, and (on the -E variant) Sequence of Events (SOE) capture.

The YOKOGAWA ADV169 is a 64-channel digital input module for the CENTUM VP / CS 3000 distributed control system, compatible with the ST6 standard. It is designed for high-density acquisition of discrete field signals such as contact states and voltage statuses.

The YOKOGAWA ADV851 is a digital input/output module for the CENTUM VP / CS 3000 distributed control system, providing 16 digital inputs and 16 transistor outputs at 24 V DC.