SIMOVERT_MASTERDRIVES

The Siemens 6SE7031-5EF84-1JC1 is an IGD1 Inverter Gate Driver/Control Module designed for the SIMOVERT MASTERDRIVES series. This module serves as the critical interface between the control board and the power IGBT section, converting low-voltage PWM signals into high-current gate drive pulses to control motor operation.

The Siemens 6SE7036-0EF85-0EA0 is a Control and Pre-charging Module (PET1 with PHASE Interface) designed for the SIMOVERT MASTERDRIVES series. This module serves as the control and pre-charging interface for infeed units of design E, operating within a 380-480V 3-phase AC range at 50/60 Hz.

The Siemens 6SE7036-5GK84-1JC2 is an IGD8 Inverter Gate Driver Board designed for the SIMOVERT MASTERDRIVES series. This module serves as the critical interface between the control board and the power IGBTs in the inverter section. It converts low-voltage PWM signals from the control unit into high-current, optically isolated gate drive pulses to switch the IGBTs on and off.

The Siemens 6SE7090-0XX84-4HA0 is a Local Bus Adapter (LBA) module designed for the SIMOVERT MASTERDRIVES series. It serves as a foundational interface board that connects and facilitates communication between the electronics boxes within the drive chassis, enabling system expansion and integration.

The Siemens 6SE7090-0XX85-1DA0 is a CUR (Control Unit Rectifier) control board for the SIMOVERT MASTERDRIVES series. It serves as the core control module for infeed and regenerative feedback units, managing the conversion of AC power to a stable DC bus and handling energy feedback to the grid.