Honeywell

The Honeywell 80364007-100 MU-TAOY52 is an Analog Output Field Termination Assembly (FTA) used in Honeywell process control systems. It serves as the interface between the control system's I/O modules and field wiring, providing screw terminals for connecting analog output field devices.

The Honeywell 80363972-150 MC-PDIY22 is a Digital Input Processor Module for Honeywell's process control systems. It provides 32 digital input channels for sensing 24 VDC signals, used to interface field devices such as switches, limit contacts, and status sensors with the control system.

The Honeywell 80363969-100 MU-PAOY22 is an Analog Output Processor (AOP) module used in Honeywell TDC 3000 and Experion PKS distributed control systems. It provides 16 isolated output channels with a 4–20 mA signal range to drive field devices such as valves, actuators, and positioners.

The Honeywell 51401216-100 is a UCN Power System Controller Assembly for Honeywell's Universal Control Network (UCN), commonly associated with TDC 3000 systems . It functions as part of the power control architecture rather than a standalone I/O module.

The Honeywell 51303948-100 MU-PSRB04 is a Battery Backup Module designed for Honeywell's Distributed Control Systems (DCS), particularly the HPM (High-Performance Process Manager) and APM (Advanced Process Manager) architectures. It provides 48 VDC backup power to critical control nodes during primary power loss, delivering approximately 20 minutes of runtime under full load to allow for controlled shutdowns or power restoration.

The Honeywell 51201420-025 MU-KFTA25 is an IOP-to-FTA cable with a length of 25 meters. It is an unshielded cable used in Honeywell HPM systems to connect the I/O Processor (IOP) to the Field Termination Assembly (FTA), with a maximum allowable length of 50 meters for this cable type. 

The Honeywell 51201420-020  MU-KFTA20 is an FTA (Field Termination Assembly) cable with a length of 20 meters. The "20" suffix follows the same naming convention as other MU-KFTA series cables, indicating the cable length in meters.

The Honeywell 51201420-015 MU-KFTA15 is a Field Termination Assembly (FTA) cable with a length of 15 meters. It is a passive interconnection cable used to connect I/O modules or processors to Field Termination Assemblies in Honeywell process control systems such as TDC 3000, TPS, and Experion PKS.

The Honeywell 51201420-010  MU-KFTA10 is an FTA (Field Termination Assembly) cable with a length of 10 meters, used to connect the I/O Processor (IOP) or control-system interface to the Field Termination Assembly for signal transmission in Honeywell process control systems (such as TPS, UCN, and HPM).

The Honeywell 51201420-008 MU-KFTA08 is an IOP-to-FTA cable used in Honeywell HPM/PM/APM and Experion PKS systems. The "08" suffix indicates a cable length of 8 meters, connecting the I/O Processor (IOP) module to the Field Termination Assembly (FTA) for signal transmission.

The Honeywell 51201420-006  MU-KFTA06 is an IOP-to-FTA cable, with the "06" suffix indicating a length of 6 meters. It is used to connect the I/O Processor (IOP) to the Field Termination Assembly (FTA) in Honeywell HPM (High-Performance Process Manager) systems, and the maximum allowable length for this cable type is 50 meters.

The Honeywell 51201420-005 MU-KFTA05 is a Field Termination Assembly (FTA) I/O cable, typically 5 meters in length. It is used to connect Field Termination Assemblies to I/O processors within Honeywell process control systems such as TDC 3000, TotalPlant Solution (TPS), and Experion PKS . The cable features a phone-to-phone connector interface and includes a FASTON terminal for secure grounding.