Honeywell

The Honeywell 51201420-010  MU-KFTA10 is a Field Termination Assembly (FTA) Cable, designed for use within Honeywell's industrial automation and Distributed Control System (DCS) environments . It functions as a connection cable linking I/O processors to field termination points, with a commonly cited length of 10 meters.

The Honeywell 51201420-004 is a Termination Assembly Cable intended for industrial control and automation systems, serving as a connectivity component for reliable signal transmission.

The Honeywell 51201394-100 is a UCN (Universal Control Network) 2-Port Drop Tap Kit designed for the Honeywell TDC 3000 Distributed Control System (DCS). It is a passive physical-layer component used to connect devices or expansion modules to the main UCN trunk cable, featuring dual BNC connectors with 75-ohm impedance matching to ensure signal integrity and prevent reflections. The kit typically includes drop taps, terminators, and mounting hardware.

The Honeywell 51196929-135 is a 3.5-inch Zip disk drive used in legacy Honeywell TDC 3000 distributed control systems (DCS) for data storage, program backup, and system configuration loading. It provides greater capacity and reliability compared to traditional floppy drives, serving as a critical spare part for maintaining older industrial control systems.

Honeywell 51196694-350 is an Integrated Keyboard (IKB) designed for Honeywell's Distributed Control System (DCS) operator consoles. It is primarily used with Global User Station (GUS) workstations and "Z-style" console furniture, integrating a full-travel keyboard, function key panels, and a trackball into a single unit for process control environments.

The Honeywell 51196094-200 is an FTA (Field Termination Assembly) mounting channel for use with wide Rittal cabinets, equipped with a shield ground bar.

 The Honeywell 51195199-002 is a UCN Trunk Cable Set with a length of 2.5 meters, using RG-11 coaxial cable.

Honeywell 51195153-001 is a UCN (Universal Control Network) drop cable set based on RG-6 coaxial cable, with a standard length of 1 meter and an impedance of 75 ohms. It is used to connect CNI modules to UCN taps in Honeywell TPS (TotalPlant Solution) or Experion PKS systems, and is a critical component for signal transmission in DCS networks.

The Honeywell 51192060-100 is a Nickel-Cadmium (NiCad) storage battery module designed for industrial control systems, particularly PLC and DCS applications. It provides reliable backup power with a nominal voltage of 12 VDC and a capacity of 100 Ah, featuring maintenance-free operation and a cycle life of approximately 1000 cycles at 80% depth of discharge.

The Honeywell 51190728-105 is a BNC Tee Adapter (Tee Connector) used for the Local Control Network (LCN) coaxial cable in Honeywell TDC 3000 / TotalPlant distributed control systems.

The Honeywell 51190582-125 is a 0.25 Amp quick-blow fuse (5x20mm) used in Honeywell Series C I/O systems. It protects the power supply to the Field Termination Assemblies (FTAs), with four fuses required per IOTA.

The Honeywell 30754661-021 is an industrial control module designed for precision automation applications.it is generally supporting Modbus RTU communication and offering reliable performance in harsh environments.