#EmersonDeltaV

The Emerson KJ4110X1-EA1 is an Intrinsically Safe (IS) System Power Supply Unit for the DeltaV system, designed to provide regulated 12 VDC power to IS I/O modules in hazardous areas.

The Emerson KJ4020X1-BD1 is a Fieldbus Power Conditioner for the DeltaV system, used to provide stable power and signal conditioning for Foundation Fieldbus networks.

The Emerson KJ4003X1-BH1 is a DeltaV VerticalPLUS standard extender cable, used to connect LocalBus signals and power between adjacent DeltaV carriers over a 1.1-meter (43-inch) length.

The Emerson KJ4003X1-BF1 is a VerticalPLUS I/O Carrier Extender (Left) for the DeltaV system, used to extend LocalBus communication and power distribution to the left side of a carrier assembly.

The Emerson KJ4003X1-BE1 is a VerticalPLUS I/O Carrier Extender (Right) for the DeltaV system, used to extend the LocalBus communication and power connections between carrier assemblies in a VerticalPLUS layout . It is a 1-slot-wide component that does not host functional I/O modules itself, but serves as a structural and electrical bridge to continue the bus path to the right side.

The Emerson KJ4003X1-BC1 is a 4-wide VerticalPLUS power/controller carrier for the DeltaV distributed control system, used to mount power supply and controller modules while providing power distribution and bus connectivity.

The Emerson KJ4001X1-BA1 is a 2-slot local bus carrier for the DeltaV system, providing the physical mounting and electrical backplane for controllers and power supply modules.

The Emerson KJ3245X1-BA1 is a DeltaV AS-Interface (AS-i) Card (Actuator Sensor Interface), used to connect AS-i network field devices (sensors and actuators) to the DeltaV control system.

The Emerson KJ3243X1-EA1 is a DeltaV Redundant Profibus DP Terminal Block for the DeltaV M-series system, providing the terminal interface for redundant Profibus DP cards. It operates on 5 VDC at 100 mA, supports an operating temperature range of –40°C to +70°C, and carries an IP20 protection rating.

The Emerson KJ3242X1-BK1 is an S-Series H1 Card for the DeltaV distributed control system, providing FOUNDATION Fieldbus H1 connectivity. It features two independent H1 ports for communication with smart field devices, with LocalBus power of 12 VDC at 300 mA and fieldbus power of 9–32 VDC at 12 mA per port . The module is certified for hazardous areas (ATEX/IECEx Zone 2) and operates from –40°C to +70°C .

The Emerson KJ3224X1-EA1 is a Series 2 thermocouple terminal block for the DeltaV distributed control system, used to provide secure field-wiring termination for thermocouple and millivolt signals.

The Emerson KJ3224X1-EA1 is a thermocouple terminal block for the DeltaV system, designed to provide secure field-wiring termination for thermocouple and millivolt signals.