#DeltaV

The Emerson VE4003S2B3 is a 4-wire I/O termination block for the DeltaV M-series Traditional I/O system. It serves as the physical wiring interface for field connections, most commonly paired with an 8-channel 4–20 mA HART analog input card (such as the KJ3222X1-BA1).

The Emerson 12P3439X012 KJ2003X1-BB1 is a DeltaV MD Plus Controller for Emerson's distributed control system. It serves as a control module executing regulatory and logic functions, with a LocalBus power rating of +5 VDC at 1.4 A and an operating temperature range of -40°C to 70°C.

The Emerson VE4015  KJ3006X1-BA1 is a 4-channel Pulse Count Input Card for the DeltaV S-series system. It is designed to receive pulse signals from flow meters, encoders, and speed sensors, performing functions such as flow totalization and RPM measurement, with a maximum input frequency of 50 kHz and 32-bit high-speed counters.

The Emerson VE4003S5B1 KJ3002X1-BG2 is an 8-channel thermocouple/mV analog input module for the DeltaV distributed control system. It is designed to directly accept low-level millivolt signals from thermocouple sensors for precise temperature measurement, featuring cold junction compensation and channel-level diagnostics.

The Emerson VE3008 KJ2005X1-MQ1 is a DeltaV MQ Controller for Emerson's DeltaV distributed control system. It serves as the central control execution engine, running regulatory loops, batch sequences, and logic processing while providing dual redundant Ethernet ports and 48 MB of user memory.

The Emerson VE3051C0 is a 2-Wide Power/Controller Carrier for the DeltaV M-series distributed control system. It serves as a mounting and backplane module that provides physical support, system power distribution, and communication pathways for controllers and power supplies.

The Emerson KJ3212X1-BA1 is a Series 2 Pulse/Multifunction Input Card for the DeltaV M-series Traditional I/O system. It provides four channels for pulse-count or compatible dry-contact input applications, operates with 24 VDC field power for dry-contact use, and uses C6 function keying.

The Emerson KJ3006X1-BA1 is a Multifunction I/O Card for the DeltaV system, specifically a Pulse Count Input Card (4-channel, 24 VDC, dry contact) . It handles pulse counting and discrete signal processing within the DeltaV I/O architecture.

The Emerson KJ3003X1-EA1 is a serial interface terminal block for the DeltaV system, used to provide a physical connection point for serial communication (RS-232/RS-485) with third-party devices such as PLCs and intelligent instruments. 

The Emerson KJ3002X1-BG2 is an 8-channel thermocouple/mV analog input module for the DeltaV system, designed for temperature measurement using thermocouple sensors and low-level millivolt signals. It features a field circuit rating of 5.5 VDC at 0.6 mA per channel and LocalBus power of 12 VDC at 350 mA.

The Emerson KJ2231X1-EE1 is a SIS Current Limiter for the DeltaV Safety Instrumented System. It provides current-limiting protection for safety-related output circuits in hazardous areas, with an input of 29 VDC and output rating of 28.7 VDC / 120 mA, and is certified for use in Zone 2 / Class I Div. 2 environments.

The Emerson KJ2231X1-EC1 is an End of Line (EOL) Resistance Module for the DeltaV Safety Instrumented System (SIS). It provides a fixed termination resistance at the end of safety loops, enabling the system to detect open circuits and short circuits for loop integrity monitoring. The module requires no calibration and operates on 12 VDC.