analog output

The B&R 3AO350.6 is an analog output module manufactured by B&R Industrial Automation (a member of the ABB Group) designed for use in the B&R System 2005 industrial automation and PLC platform.

The B&R 7AO352.70 (also known as AO352) is an analog output module made by B&R Industrial Automation for their System 2003 PLC (Programmable Logic Controller) platform.

4 analog outputs ±10 V Integrated enable relay for initial phase Very short cycle times Optimal shield grounding on all channels The module is equipped with 4 inputs with 12-bit digital converter resolution. The output signal range is ±10 V.

The B&R X20AO2622 is an analog output module for the B&R X20 modular I/O system. Based on the X20 naming convention, the "AO" prefix indicates an analog output module, and "2622" identifies the specific channel configuration and signal type. It provides analog output signals for controlling valves, actuators, and other analog field devices, designed for integration into X20 I/O slices.

The B&R X20AO2622 is an analog output module for the B&R X20 modular I/O system. Based on the X20 naming convention, the "AO" prefix indicates an analog output module, and "2622" identifies the specific channel configuration and signal type. It provides analog output signals for controlling valves, actuators, and other analog field devices, designed for integration into X20 I/O slices.

The B&R X20AO2632 is an analog output module for the B&R X20 modular I/O system. Based on the X20 naming convention, the "AO" prefix indicates an analog output module, and "2632" identifies the specific channel configuration and signal type. It provides analog output signals for controlling valves, actuators, and other analog field devices, designed for integration into X20 I/O slices.

The B&R X20AO4622 is an analog output module for the B&R X20 modular I/O system. Based on the X20 naming convention, the "AO" prefix indicates an analog output module, and "4622" identifies the specific channel configuration and signal type. It provides analog output signals for controlling valves, actuators, and other analog field devices, designed for integration into X20 I/O slices.

The B&R X20AO4622 is an analog output module for the B&R X20 modular I/O system. Based on the X20 naming convention, the "AO" prefix indicates an analog output module, and "4622" identifies the specific channel configuration and signal type. It provides analog output signals for controlling valves, actuators, and other analog field devices, designed for integration into X20 I/O slices.

The KL4494 is a four-channel analog output terminal from the Beckhoff Bus Terminal series (KL series) for the traditional K-Bus I/O system. It outputs bipolar ±10 V voltage signals with 16-bit resolution, providing finer output steps than the 12-bit KL4034. It is used to control drives, servo controllers, proportional valves, and other devices that require a signed analog setpoint where higher output resolution is required. It belongs to the KL4xxx high-resolution analog output family. Unlike EtherCAT terminals (EL series), the KL series communicates via the K-Bus and is typically used with Beckhoff Bus Couplers or Bus Terminal Controllers.

The KL4438 is an eight-channel analog output terminal from the Beckhoff Bus Terminal series (KL series) for the traditional K-Bus I/O system, featuring integrated diagnostics. It outputs bipolar ±10 V voltage signals to control drives, servo controllers, proportional valves, and other devices that require a signed analog setpoint, while providing diagnostic feedback on output status. It belongs to the KL4xxx analog output family and is the 8-channel member of the bipolar diagnostic output family, alongside the KL4434. Unlike EtherCAT terminals (EL series), the KL series communicates via the K-Bus and is typically used with Beckhoff Bus Couplers or Bus Terminal Controllers.

The KL4434 is a four-channel analog output terminal from the Beckhoff Bus Terminal series (KL series) for the traditional K-Bus I/O system, featuring integrated diagnostics. It outputs bipolar ±10 V voltage signals to control drives, servo controllers, proportional valves, and other devices that require a signed analog setpoint, while providing diagnostic feedback on output status. It belongs to the KL4xxx analog output family and is the bipolar counterpart to the KL4404 (0–10 V diagnostic output). Unlike EtherCAT terminals (EL series), the KL series communicates via the K-Bus and is typically used with Beckhoff Bus Couplers or Bus Terminal Controllers.

The KL4428 is an eight-channel analog output terminal from the Beckhoff Bus Terminal series (KL series) for the traditional K-Bus I/O system, featuring integrated diagnostics. It outputs 4–20 mA current-loop signals to control actuators, valves, drives, and other devices that accept an analog current setpoint, while providing diagnostic feedback on output status. It belongs to the KL4xxx analog output family and is the 8-channel member of the 4–20 mA diagnostic output family, alongside the KL4424. Unlike EtherCAT terminals (EL series), the KL series communicates via the K-Bus and is typically used with Beckhoff Bus Couplers or Bus Terminal Controllers.