3300 XL 8mm Proximitor Sensor

The Bently Nevada 330180-91-00 is a Proximitor Sensor from the 3300 XL 8 mm series, manufactured by Baker Hughes (Bently Nevada). Its core function is to serve as the signal conditioning module for the 3300 XL Proximity Transducer System, converting the electrical signal from a non-contact eddy-current probe into a precise analog voltage output proportional to the gap between the probe tip and a conductive target surface. This enables both static (position) and dynamic (vibration) measurements on critical rotating machinery.

The Bently Nevada 330180-X1-05 is a 3300 XL Proximitor Sensor designed for use in industrial proximity transducer systems. As the primary signal conditioning interface, it converts high-frequency eddy current signals generated at the probe tip into a calibrated voltage output directly proportional to the distance between the probe tip and the monitored conductive target . This enables precise measurement of both static (position) and dynamic (vibration) values in rotating machinery. The 3300 XL 8 mm system is Bently Nevada's most advanced eddy current proximity sensor system, fully complying with American Petroleum Institute (API) 670 standards for mechanical construction, linear range, accuracy, and temperature stability . The -X1 designation indicates a 5-meter system length, making this sensor suitable for standard industrial installations requiring moderate cable runs between the probe and the monitoring system.

The Bently Nevada 330980-71-05 is a 3300 XL NSv (Narrow Side View) Proximitor Sensor system designed for precision vibration and position measurement in rotating machinery. Its core function is to provide signal conditioning for 3300 NSv proximity probes, converting the probe's gap voltage signal into a linear DC voltage output proportional to shaft displacement. This system is specifically engineered for space-constrained applications where standard 3300 XL 8mm probes cannot be installed due to counterbore limitations or small target areas.