Products

The Allen‑Bradley 140MT‑C‑KRY is a padlockable operating knob accessory from Rockwell Automation, designed for use with 140MT motor circuit protectors and 140UT circuit breakers. . This red and yellow twist knob enhances safety by allowing the operating mechanism to be securely locked in the OFF position, preventing unauthorized or accidental operation during maintenance or downtime. . It is a critical component for installations where secure isolation is required for personnel safety and equipment protection.

The Allen‑Bradley 1783‑CMS20DB is a 20-port managed industrial Ethernet switch from the Stratix 5200 family, designed for reliable Layer 2 access switching in demanding industrial automation environments. . Based on the Cisco IOS XE platform, it combines enterprise-class networking capabilities with ruggedized construction suitable for factory floor and process automation applications. . As a key component of Rockwell Automation's Integrated Architecture system, it offers seamless integration with Logix controllers and FactoryTalk View HMI through add-on profiles and faceplates.

The Allen‑Bradley 1783‑SFP100LX is a 100 Mbps Small Form‑Factor Pluggable (SFP) fiber optic transceiver from Rockwell Automation's Stratix family . Engineered for industrial networking applications, this module provides 100BASE‑LX connectivity over single‑mode fiber (SMF), enabling reliable data transmission over extended distances. It is designed for seamless integration with Rockwell Automation switches and adapters that support SFP interfaces.

The Allen‑Bradley SK‑R9‑FAN11‑F6 is a dedicated fan kit with a Type 1 heatsink, engineered specifically for the PowerFlex 750‑Series of industrial drives . This accessory is vital for maintaining the thermal management of Frame 6 drives, ensuring they operate within optimal temperature ranges to deliver reliable performance and extended service life in demanding industrial environments.

The Allen‑Bradley 1784‑SD1 is an industrial‑grade 1GB Secure Digital (SD) memory card designed to provide reliable, non‑volatile storage for Rockwell Automation Logix control platforms. This card is purpose‑built for the factory floor, offering a robust solution for storing controller programs, tag data, firmware history, and configuration files in environments where standard consumer SD cards would be prone to failure. Designed for controllers such as CompactLogix 5370, ControlLogix 5570, and newer models, the 1784‑SD1 ensures that critical application code and data can be preserved even during power cycles, enabling rapid disaster recovery and reducing mean time to repair (MTTR). It is engineered with extended temperature, shock, and vibration resistance, utilizing industrial‑grade flash architecture to prevent data corruption under extreme industrial conditions.

The Allen Bradley 1771-IFE is an analog input module for the PLC-5 programmable controller family. Its core function is to sense up to 16 single-ended or 8 differential analog inputs and convert them into proportional 12-bit binary values for processing by the PLC.

The Allen Bradley 2094-BC04-M03-S is an integrated axis module (IAM) from the Kinetix 6000 multi-axis servo drive family. Its core function is to combine a converter and inverter in a single unit, converting AC power to DC and then back to controlled AC to drive servo motors in high-performance motion control applications.

The Allen‑Bradley 2090‑CFBM7DF‑CEAF15 is a high‑performance 15‑meter continuous‑flex feedback cable from the Kinetix 2090 series, designed for use with Kinetix 5500 and Kinetix 5700 drive systems and Kinetix VP servo motors. This cable integrates high‑resolution SIN/COS or resolver feedback signals, power, and brake conductors into a single shielded jacket, simplifying machine wiring while delivering excellent noise immunity and signal integrity. The CFBM7DF designation identifies a continuous‑flex (CF) feedback cable with drive‑end flying leads (DF). The CEAF15 suffix confirms the SIN/COS high‑resolution encoder type and 15‑meter length.

The Allen‑Bradley PN‑89063 is a drive control board specifically designed for the PowerFlex 753 series of AC variable frequency drives from Rockwell Automation. This board serves as the central processing and command unit of the drive, translating control signals from a PLC, HMI, or network into the precise PWM gating sequences that control the drive's IGBT power section. The PN‑89063 is a genuine OEM component that provides the critical interface between the drive's control logic and its power stage. In the event of drive failure, replacing this board with an original component is often the fastest path to restoring equipment operation, particularly when the original drive parameters and configurations are already deeply integrated into a production process.

The Siemens 6ES7518-4FP00-0AB0 is a CPU 1518F-4 PN/DP central processing unit from the SIMATIC S7-1500F series, engineered for fail-safe automation applications requiring functional safety up to SIL 3 / PL e. As a high-performance fail-safe CPU, it combines standard automation control with integrated safety functions in a single device, eliminating the need for separate safety controllers. With 9 MB work memory for program and 60 MB for data, it is designed for demanding industrial control tasks in manufacturing, process, and infrastructure applications where both performance and safety are critical.

The Siemens 6ES7516-3FN02-0AB0 is a CPU 1516F-3 PN/DP central processing unit from the SIMATIC S7-1500F series, designed for fail-safe automation applications requiring functional safety up to SIL 3 / PL e. As a fail-safe CPU, it combines standard automation control with safety-related functions in a single device, eliminating the need for separate safety controllers. With 1.5 MB work memory for program and 5 MB for data, it is suitable for complex industrial control tasks in manufacturing, process, and infrastructure applications.

The Siemens 6ES7517-3HP00-0AB0 is a CPU 1517H-3 PN central processing unit from the SIMATIC S7-1500H series, engineered for high-availability redundant automation systems. Designed for critical processes where downtime is not an option, this CPU operates in a redundant pair configuration with dedicated H-SYNC interfaces for seamless synchronization between partner CPUs. With 2 MB program memory and 8 MB data memory, it provides robust performance for demanding industrial control applications requiring maximum system uptime.