Products

The ABB SDCS-COM-81 is a high-performance communication interface module designed for ABB's DCS500, DCS600, and DCS800 series DC drive systems. Available with part numbers 3ADT220134R0001 and 3ADT314900R1002, this module serves as the critical link between the drive system and the wider plant automation network . Utilizing ABB's proprietary DDCS (Distributed Drive Control System) protocol, the module enables high-speed, real-time data exchange between DC drives and supervisory control systems such as ABB AC800M controllers, DCS platforms, and PLCs . The fiber optic transmission medium provides exceptional immunity to electromagnetic interference common in heavy industrial environments.

The ABB SDCS-CON-F01 (3ADT316500R1501) is the main control board central to the computational architecture of the ABB DCS550 and DCS600 series DC drive systems. This advanced microprocessor-based card functions as the "brain" of the drive, handling critical real-time regulation loops for speed, torque, and current.   Designed to replace or serve as a spare for the original SDCS-CON-F, the "-F01" revision offers enhanced reliability, faster fault response, and improved compatibility with modern system firmware.

The ABB SDCS-CON-4 (3ADT313900R1501) is the main control board and the "digital brain" of the ABB DCS800 series DC drives . It is responsible for executing control algorithms, managing communication, generating PWM pulses for the thyristor bridge, and providing comprehensive drive protection. As a fourth-generation control platform, it delivers precision motor control and dynamic response for applications ranging from 10 kW to multi-megawatt installations.

The ABB PFEA111-65 is a high-precision tension electronics unit engineered for demanding industrial web processing applications. This field-mountable unit processes signals from up to two ABB Pressductor® magneto-elastic load cells (PFCL or PFTL series) and provides real-time tension measurement and control for continuous materials such as paper, film, foil, textiles, and cable. The -65 designation indicates the IP65 enclosure version — a rugged, wall-mounted housing that provides protection against dust and water jets . Unlike the IP20 DIN-rail variant (PFEA111-20), this version is specifically engineered for direct installation in harsh, dirty, or wet environments such as paper mills, metal processing lines, and outdoor installations. This module is available with ordering number 3BSE050090R65 (the official designation for the IP65 variant, while 3BSE028140R65 corresponds to the IP20 version).

The ABB PFEA112-65 is a high-precision tension electronics unit designed for demanding industrial web processing applications. This field-mountable unit processes signals from up to two ABB Pressductor® magneto-elastic load cells (PFTL or PFCL series) and provides real-time tension measurement and control for materials such as paper, film, foil, textiles, and cable . The -65 designation indicates the IP65 enclosure version — a rugged, wall-mounted housing that provides protection against dust and water jets . Unlike the IP20 DIN-rail variant (PFEA112-20), this version is specifically engineered for direct installation in harsh, dirty, or wet environments such as paper mills, metal processing lines, and outdoor installations . This module is available with two ordering numbers — 3BSE030369R0065 and 3BSE050091R65 — which represent the same functional unit under different ABB ordering systems. 

New and original ABB ACBU-A2 3AUA0000125090 DCS Module in stock

The ABB TK503 (1TNE968901R1100) is an original programming cable designed to connect a PC to ABB AC500 programmable logic controllers (PLCs) and related industrial automation equipment. This cable provides a convenient and reliable bridge between a computer's USB port and the RS485 D-Sub 9-pin serial interface commonly found on ABB AC500 CPUs and communication modules. With a length of 3 meters, the TK503 offers sufficient reach for flexible workstation setup and machine-side programming in industrial environments. It is a genuine, high-quality ABB accessory intended for commissioning, programming, firmware updates, and troubleshooting applications. 

The ABB YPK114A (3ASD399002B20) is a critical communication and control board within ABB's industrial automation ecosystem. It serves dual roles depending on the system architecture: as a Drive Communication Board (DCB) providing high-speed, noise-immune fiber optic data exchange, and as a DC Link Control Board managing the power bus in high-power drives. This versatility makes it indispensable in ABB's most demanding applications, including the IRC5 robot controller, ACS6000 series medium-voltage drives, and Symphony DCS systems. Whether used as the "highway" for robot motion data or the "commander" of a drive's power bus, the YPK114A ensures fast, reliable, and deterministic communication between the main controller and the field equipment.

The ABB RTAC-01 (64610805) is a pulse encoder interface module designed specifically for integration with ABB ACS and ACH series variable frequency drives, including the ACS800 family. Its core function is to convert signals from a digital pulse encoder into a format usable by the drive, providing precise motor speed and position feedback for closed-loop control applications.

The ABB PFEA113-65 (3BSE050092R65) is a high-performance tension controller from the PFEA113 series, part of ABB's Web Tension Systems . Its core function is to serve as a dedicated control unit for precise regulation of web, wire, and film tension in industrial processing lines, ensuring consistent material quality and preventing defects during winding and unwinding operation.

The ABB LD810HSEEX (3BSE091722R1) is an explosion-proof FOUNDATION Fieldbus (FF) linking device designed for ABB System 800xA distributed control systems . Its core function is to serve as a high-speed Ethernet (HSE) gateway, connecting up to four independent FF-H1 fieldbus segments to the control network. It enables bidirectional data exchange, diagnostics, and asset management for field instruments in hazardous areas, supporting real-time data transfer and cross-link data republishing between H1 segments and the HSE subnet.

The ABB LD800HSE (3BDH000320R02) is a FOUNDATION Fieldbus (FF) linking device for ABB Advant OCS and System 800xA distributed control systems . Its core function is to serve as a gateway between up to four FF H1 fieldbus segments and a high-speed Ethernet (HSE) subnet, enabling seamless integration of FOUNDATION Fieldbus devices into the control system architecture.