Products

The Honeywell FS-SDOL-0424 is a safe loop-monitored digital output module designed for the Honeywell Safety Manager and FSC (Fail Safe Control) systems. It provides four independent 24 VDC output channels, each capable of delivering 1 A, with built-in loop integrity monitoring to detect lead breakage and short circuits, making it ideal for safety-critical ESD (Emergency Shutdown) and F&G (Fire & Gas) applications.

The MVI56-AFC is an in-rack liquid and gas flow computer module for the Rockwell Automation ControlLogix platform. It offloads complex flow calculations from the PLC, supporting AGA 3, 7, 8 and API MPMS standards for hydrocarbon measurement. 

The ProSoft MVI56-DFCM is a DF1 Master/Slave serial communication module for the Rockwell Automation ControlLogix platform. It enables seamless integration between ControlLogix processors and DF1-compatible devices, allowing the system to act as a SCADA sub‑master or slave on a DF1 network.

The ProSoft MVI56-DH485 is a DH-485 communication module for the Rockwell Automation ControlLogix platform. It provides a high-speed interface between ControlLogix processors and DH-485 networks, allowing seamless integration with legacy Rockwell Automation PLCs (such as SLC 5/03) and other DH-485 compatible end devices.

The ProSoft MVI56-GSC is a Generic ASCII Serial Communication Module for the Rockwell Automation ControlLogix platform. It adds two fully configurable serial ports that enable the ControlLogix processor to communicate with ASCII-based devices such as barcode scanners, weigh scales, printers, and legacy serial instruments—without consuming the processor's front port or valuable processing time.

The ProSoft MVI56-MCM is a Modbus Master/Slave communication module for the Rockwell Automation ControlLogix platform. It acts as a gateway between the ControlLogix backplane and Modbus-compatible devices, enabling seamless data exchange with instruments, drives, and SCADA systems.

The Pepperl+Fuchs S1SL-2AI-2C is a 2-channel passive isolator for analog current signals in industrial automation. It is loop-powered and transfers 0/4 ... 20 mA signals from the field side to the control side with galvanic isolation. With 0.1% accuracy, 6.2 mm ultra-slim housing, and ATEX/IECEx Zone 2 certification, this device provides a reliable, space-saving solution for isolating current signals in applications where an external power supply is unavailable or undesirable.

The Pepperl+Fuchs S1SD-1TI-1U is a 1-channel temperature signal conditioner designed for isolating and converting analog temperature signals from the field to a control system. It accepts inputs from a wide variety of sensors, including thermocouples, RTDs, potentiometers, and millivolt sources, and provides a standard current or voltage output..

The Bently Nevada 133388-02 is the Tachometer Module for the 3500/50 in the 3500 Series Machinery Protection System. This dual-channel module is engineered for precise speed monitoring of rotating machinery, measuring shaft rotational speed, rotor acceleration, and direction.

The Bently Nevada 330105-02-12-05-12-05 is a reverse-mount proximity probe from the industry-standard 3300 XL 8 mm eddy current transducer system. Designed for non-contact vibration and position measurement, this probe is engineered to monitor critical rotating machinery such as steam turbines, compressors, and fans.

The Bently Nevada 190501-00-00-00 is a specialized Velomitor CT piezoelectric velocity transducer designed for low-frequency casing vibration measurement on slow-speed rotating machinery.

The Honeywell CC-PSP401 51454122-175 is a dedicated Speed Protection Module (SPM) engineered for the Experion PKS Series-C control system. It provides high-integrity speed monitoring and overspeed trip execution for critical rotating machinery such as turbines, compressors, and pumps.