The Bently Nevada 3500/32-01-00 is a 4-Channel Relay Module for the 3500 series machinery protection system. It is a full-height module that provides four relay outputs, each independently programmable to perform voting logic. The module uses Alarm Drive Logic with AND/OR programming, allowing relays to respond to Alert, Danger, Not-OK, or individual PPL statuses from any monitor channel in the rack.
Item No :
3500/32-01-00Order(MOQ) :
1 PiecePayment :
EXW/CIFProduct Origin :
USAShipping Port :
WuhanLead Time :
3-5daysWeight :
3kg| Specification | Description |
|---|---|
| Manufacturer | Bently Nevada (Baker Hughes) |
| Model | 3500/32-01-00 |
| Product Family | 3500 Machinery Protection System |
| Product Type | 4-Channel Relay Module (Full-Height) |
| Number of Relays | 4 independent channels |
| Relay Type | Two SPDT relays connected as DPDT per channel |
| Contact Life | 100,000 cycles @ 5A, 24 Vdc or 120 Vac |
| Max Switched Current | 5 A |
| Max Switched Voltage | 30 Vdc / 250 Vac |
| Switched Power Capacity | 120 W DC / 600 VA AC |
| Arc Suppressor | 250 Vrms, standard installation |
| Sealing | Epoxy-sealed relay assembly |
| Operating Mode | Switch-selectable Normally Energized or Normally De-energized |
| Power Consumption | 6 W typical |
| LED Indicators | OK, TX/RX, CH ALARM |
| Rack Space | 1 full-height front slot + 1 full-height rear I/O slot |
| Operating Temperature | -30°C to +65°C |
| Storage Temperature | -40°C to +85°C |
| Humidity | 95%, non-condensing |
| Main Module Dimensions | 241 mm x 24.4 mm x 242 mm |
| Main Module Weight | 0.7 kg |
| I/O Module Dimensions | 241 mm x 24.4 mm x 99.1 mm |
| I/O Module Weight | 0.4 kg |
| Lifecycle Status | Active / Mature |
| Model | Description | Typical Application |
|---|---|---|
| 3500/32-01-00 (this model) | 4-Channel Relay Module, no agency approval | Standard alarm/shutdown logic |
| 3500/32-01-01 | 4-Channel Relay Module, CSA/NRTL/C approved | North American installations requiring certification |
| 3500/32-01-02 | 4-Channel Relay Module, ATEX/IECEx/CSA approved | Hazardous area (Zone 2) installations |
| 3500/32M-01-00 | Enhanced 4-Channel Relay Module (SIL 2) | Functional safety applications |
| 3500/33 | 16-Channel Relay Module | High-density relay output requirements |
| 125712-01 | Spare 4-Channel Relay Module (main card) | Replacement main card for 3500/32 |
| 125720-01 | Spare 4-Channel Relay I/O Module | Replacement I/O module for 3500/32 |
| 125720-02 | Spare 4-Channel Relay I/O Module (hazardous area/functional safety) | Replacement I/O for 3500/32M applications |
Q1: What is the primary function of the 3500/32-01-00?
It is a 4-Channel Relay Module that provides four independent relay outputs for alarm and shutdown logic in the 3500 machinery protection system. Each output can be independently programmed to perform voting logic using Alarm Drive Logic with AND/OR combinations of Alert, Danger, Not-OK, or PPL inputs from any monitor channel in the rack .
Q2: Where can the 3500/32-01-00 be installed in the rack?
The module can be placed in any slot to the right of the Rack Interface Module (RIM) or Transient Data Interface (TDI). It occupies one full-height front slot and requires one full-height rear slot for the I/O module .
Q3: What is the difference between the 3500/32 and the 3500/32M?
The 3500/32M is the enhanced version that supports SIL 2 functional safety and ATEX/IECEx hazardous area certifications. It uses the 149986-02 main card, while the standard 3500/32 uses the 125712-01 main card. The two are not interchangeable — installing a 3500/32M card in a legacy 3500/32 rack causes functionality issues, while using a 3500/32 card in a 3500/32M rack compromises safety certifications.
Q4: What are the common causes of channel alarm LEDs staying illuminated?
Common causes include:
Relay coil failure or stuck contact: Cycle the channel's programmed logic in the configuration software and check for continuity across relay contacts.
Programming/voting logic misconfiguration: Re-verify the Alarm Drive Logic setup in the 3500 Rack Configuration Software.
Backplane communication fault: If TX/RX LED is not flashing, reseat the module and check adjacent modules for the same symptom.
Q5: What spare parts are available for the 3500/32-01-00?
Key spares include:
125712-01: Spare 4-Channel Relay Module (main card)
125720-01: Spare 4-Channel Relay I/O Module (for standard applications)
125720-02: Spare 4-Channel Relay I/O Module (for hazardous area/functional safety)
129771-01: 3500/32 and 3500/32M Relay Module User Guide
The Bently Nevada 3500/60-01-00 is a 6-Channel Temperature Monitor for the 3500 Machinery Protection System. The complete configuration consists of the 163179-01 Temperature Monitor (main card) and the 133819-01 RTD/TC I/O Module with internal terminations.
The Bently Nevada 3500/53M-01-00 is a Single-Channel Electronic Overspeed Detection Module for the 3500 Machinery Protection System, configured with the 286566-01 Overspeed Detection main card and the 133396-01 Overspeed Detection I/O Module.
The Bently Nevada 3500/53M-01-00 is a Single-Channel Electronic Overspeed Detection Module for the 3500 Machinery Protection System. The 3500/53M is the split-base M-series version, using the 286566-01 main card with the 133396-01 rear I/O module. It is not drop-in compatible with the legacy 3500/53 (133388-01).
The Bently Nevada 3500/53M-01-00 is a Single-Channel Electronic Overspeed Detection Module for the 3500 Machinery Protection System. The 3500/53M is the split-base M-series version, using the 286566-01 main card with the 133396-01 rear I/O module. It is not drop-in compatible with the legacy 3500/53 (133388-01).
The Bently Nevada 3500/53-03-00 is a Single-Channel Electronic Overspeed Detection Module for the 3500 Machinery Protection System, configured with the 133388-01 Overspeed Detection main card and the 133396-01 Overspeed Detection I/O Module.
he Bently Nevada 288062-02 is the Tachometer Module main card for the 3500/50M Tachometer Module in the 3500 Machinery Protection System. It is a dual-channel module that accepts input from proximity probes or magnetic pickups to determine shaft rotational speed, rotor acceleration, and rotor direction.
The Bently Nevada 3500/50M-01-00 is a 2-Channel Tachometer Module for the 3500 Machinery Protection System, configured with the 288062-02 Tachometer main card and the 133442-01 I/O Module with internal terminations. The "M" designation indicates M-series functionality, providing enhanced integration with System 1 diagnostic software.
The Bently Nevada 133442-01 is a dual-channel Tachometer I/O Module with Internal Terminations, designed for the 3500/50 Tachometer Module in the 3500 Machinery Protection System. The module conditions raw pulse signals to determine shaft rotational speed, rotor acceleration, and rotor direction, and can supply conditioned Keyphasor signals to the rack backplane for use by other monitoring modules.
Scan to Wechat :
Scan to WhatsApp :
