New and Original ABB UNS 0017a-P.V1 HIEE305106R0001 DCS Module in stock

The ABB UNS 0017a-P V1 (HIEE305106R0001) is a Firing Card (Trigger Board) designed for ABB's UNITROL 6000 X-power static excitation systems and legacy high-power thyristor converter cabinets. The board is engineered for high electromagnetic noise environments typical of power generation and heavy industrial drive applications.

  • Item No :

    HIEE305106R0001
  • Order(MOQ) :

    1
  • Payment :

    EXW
  • Product Origin :

    Sweden
  • Shipping Port :

    Wuhan
  • Lead Time :

    3-5days
  • Weight :

    3kg
  • Product Details

     
     
    Specification Description
    Manufacturer ABB
    Model UNS 0017a-P V1
    Part Number HIEE305106R0001
    Product Type Firing Card / Trigger Board 
    Applicable Systems UNITROL 6000 X-power static excitation systems; legacy high-power thyristor converter cabinets 
    Core Function Gate pulse generation, amplification, and isolation for thyristor/IGCT gate drives 
    System Platform ABB UNITROL / HIEE legacy power electronics 
    Input Signal Low-level control commands from main processor (via backplane) 
    Output Drive High-current firing pulses to thyristor gate circuits 
    Operating Temperature 0°C to +55°C (typical cabinet environment) 
    Storage Temperature -40°C to +85°C 
    Dimensions (H × W × D) 210 mm × 255 mm × 365 mm 
    Weight Approx. 1.13 kg 
    Country of Origin Switzerland 
    Customs Tariff Code 85372000 
    Lifecycle Status Legacy / Mature – available as New Surplus 

    Part Number Breakdown:

    • UNS 0017a-P – Firing Card, version "a-P" (P = Power/Trigger variant)

    • V1 – Hardware revision 1 (B/C/V2 variants exist, not interchangeable

    • HIEE305106R0001 – ABB ordering part number

    ⚠️ Version Compatibility Warning: The A-P V1 version is not interchangeable with B/C or V2 variants. Mixing versions can cause incorrect gate pulse definitions, leading to thyristor mis-firing or catastrophic power device failure .


    Related Product Model Recommendations

     
     
    Model Description Typical Application
    HIEE305106R0001 (UNS 0017a-P V1) (this model) Firing Card, V1 revision, UNITROL 6000 X-power  Standard UNITROL excitation gate drive
    3BHE035495R0024 Firing card UNS0017A-P V1 with 2400 Volt BOD  Higher voltage BOD variant
    UNS0017A-P V2 Later hardware revision (V2) Updated UNITROL configurations (verify compatibility)
    UNS 0881a-P V1 (3BHB006338R0001) GDI Gate Drive Interface Board Companion gate drive board for UNITROL 
    UNS 1860b-P V1 (3BHB001336R0001) Measuring Interface Board (MUB) Companion measurement board for excitation control
    UFC760BE143 Main Control Board (CPU) Companion processor board for UNITROL systems 
    UNS0016A-P / UNS0018A-P Related firing control modules Differ mainly in current rating and output configuration 

    Payment & Delivery

    FAQs

    Q1: What is the primary function of the UNS 0017a-P V1?

    It is a Firing Card that serves as the critical gate-drive interface between the main control processor and the high-power thyristor bridge in UNITROL excitation systems. It receives low-level firing commands from the processor via the backplane bus, then generates, amplifies, and isolates precise high-current pulses to trigger the thyristors at the correct phase angle, regulating generator field current .

    Q2: Which ABB systems is this module compatible with?

    Based on available documentation, it is compatible with ABB UNITROL 6000 X-power static excitation systems and legacy high-power thyristor converter cabinets . The UNS prefix in ABB's internal catalog is typically used for power interface boards on the drive/high-power side, distinct from the HESG process-side prefix .

    Q3: What are the common failure symptoms of a firing card?

    Common failure signs include:

    • Excitation loss or inability to maintain generator voltage

    • Thyristor firing faults (unstable or missing gate pulses)

    • Power bridge fault alarms reported to the main controller

    • Visible burn marks or damaged components on the board
      Since a firing card failure can cause excitation loss, unit trip, or even power cabinet damage, prompt replacement with a tested, genuine, version-matched board is critical .

    Q4: Is this module hot-swappable?

    No. Control power and main bridge power must be completely isolated and de-energized prior to removing or installing the card to prevent arc faults or unexpected pulse firing . Always wear a grounded anti-static wrist strap when handling the board, as the gate-driver circuitry is sensitive to ESD damage .

    Q5: Is this module still available for purchase?

    Yes, it is a legacy/sustainment product available through aftermarket suppliers and surplus stock . Various distributors list it as "New with Original Package" or "New Surplus" with 12-month warranties . Before ordering, verify the exact hardware version (V1 vs. V2) and confirm compatibility with your specific UNITROL system configuration, as the A-P V1 version is not interchangeable with B/C or V2 variants.

Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.
Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.