YOKOGAWA

The Yokogawa AIP512 is a Remote I/O (RIO) Bus Connection Module designed for Yokogawa's CENTUM CS 3000 and CENTUM VP Field Control Systems (FCS). It serves as the critical interface between the Field Control Unit (FCU) and remote I/O devices, enabling distributed I/O architectures in process industries such as refining, petrochemicals, and power generation.

The Yokogawa PW302 is a power supply module designed for Yokogawa's distributed control systems (DCS), specifically the CENTUM CS and CENTUM CS 3000 series. It is typically installed in Remote I/O (RIO) nodes or local bus nodes to provide stabilized DC power to the nested I/O modules and communication interfaces within the rack.

The Yokogawa ADM51T is a 16-point Contact Output Module (Terminal Type) for the CENTUM CS 3000, CENTUM CS 1000, and CENTUM VP distributed control systems (DCS) . It is a digital output module designed to switch binary field devices such as relays, solenoids, and indicator lamps, using transistor contact outputs rather than electromechanical relays.

The Yokogawa ADM12T is a 32-point contact input module with terminal-type connections for the CENTUM CS, CENTUM CS 3000, and CENTUM VP distributed control systems (DCS). It is a digital input module designed to acquire binary status signals from field devices such as limit switches, pushbuttons, and relay contacts. The "T" suffix denotes the terminal-type interface, which uses M4 screw terminals for direct field wiring, as opposed to the connector-type variants (ADM12C) that require external terminal boards.

The Yokogawa ADM11T is a 16-point Contact Input Module (Terminal Type) for the CENTUM CS 3000, CENTUM CS 1000, and CENTUM VP distributed control systems (DCS). It is a digital input module designed to acquire binary status signals from field devices such as limit switches, pushbuttons, and relay contacts, and is part of the RIO (Remote I/O) system.

The Yokogawa AMM32CJ is a 16-point RTD (Resistance Temperature Detector) input multiplexer module for the CENTUM CS 3000, CENTUM CS 1000, and CENTUM VP distributed control systems (DCS). It is designed for high-density temperature acquisition, supporting 3-wire RTD sensors in accordance with IEC751-1995 . The "J" suffix indicates a specific variant (likely a hardware revision or configuration), while the "C" denotes a connector-type interface requiring a dedicated cable.

The Yokogawa AMM25C is a 15-channel mV input multiplexer module with a dedicated thermocouple interface and Reference Junction Compensation (RJC) input port for the CENTUM CS, CS 3000, and CENTUM VP distributed control systems (DCS). It is optimized for high-accuracy millivolt measurement and direct thermocouple input, making it a key module for temperature-critical process applications.

The Yokogawa AMM22C is a millivolt (mV) input multiplexer module for the CENTUM CS 3000, CENTUM CS 1000, and CENTUM VP distributed control systems (DCS). It provides 16 isolated analog input channels for low-level signals, multiplexing them through a shared conversion path to reduce hardware complexity. The "-C" suffix denotes a connector-type interface (requiring a mating cable) rather than screw terminals.