English
ABB Profibus adapter RMIO-02C Control Board New in Stock

ABB Profibus adapter RMIO-02C Control Board New in Stock

The ABB RMIO-02C is a main control board designed for the ABB ACS800 series drives, serving as the central processing unit that executes core motor control algorithms, including Direct Torque Control (DTC).

  • Item No :

    RMIO-02C

  • Order(MOQ) :

    1

  • Payment :

    EXW

  • Product Origin :

    Sweden

  • Shipping Port :

    Wuhan

  • Lead Time :

    3-5days

  • Weight :

    3kg

  • Product Details

     
     
    Specification Description
    Manufacturer ABB
    Model RMIO-02C
    Product ID 64379160 
    Product Type Main Control Board (Fiber-Optic Version)
    Series Compatibility ABB ACS800 series drives (ACS800-01/02/04/07 and multi-drive configurations) 
    Core Function Executes DTC/V/F control algorithms; manages I/O, communication, and fault protection; drives AINT board via fiber-optic link 
    Supply Voltage 24 V DC (from internal drive power supply) 
    Digital Inputs 6 x DI (24 V DC) for start/stop, enable, fault reset, limits 
    Digital Outputs 3 x relay outputs for run, fault, alarm status 
    Analog Inputs 2–3 x AI (0–10 V / 4–20 mA) for setpoint signals 
    Analog Outputs 2 x AO (0–10 V) for speed/current feedback 
    Communication Interfaces Fiber-optic link (to AINT board); panel port (for CDP-312R/313R); fieldbus adapter slot (Profibus, Modbus, Ethernet) 
    Encoder Interface Supports incremental encoder for closed-loop speed/position control (HTL/TTL) 
    Operating Temperature 0°C to +55°C (typical); some sources indicate -40°C to +70°C for rugged variants 
    Protection Class IP20 
    Weight approx. 0.1 – 0.4 kg (varies by source) 

    Related Product Model Recommendations

     
     
    Model Description Typical Application
    RMIO-01C Electrical (copper) communication version, no fiber-optic link  Small-power single drives in low-interference environments
    RMIO-12C Fiber-optic version for 690V high-voltage multi-drive systems  High-voltage ACS800 multi-drive configurations
    AINT-02C Fiber-optic driver board, paired with RMIO-02C for drive power stage communication  Large-power single drives and multi-drive systems
    AINT-14C Main circuit interface board with I/O and DDCS fiber communication Signal interfacing companion
    APOW-01C Auxiliary power board, supplies 24V DC to control system Power supply for RMIO-02C and connected boards
    RDCU-02C Network-side drive control unit incorporating RMIO-02C board  Complete control unit assembly for ACS800
    CDP-312R Control panel for ACS800, connects via panel port on RMIO-02C Operator interface and parameter configuration

     

    3BSE081637R1 PM866AK02 PM860AK01
    3BSE031155R1 BC810K02 BC810K01 3BSE031154R1
    3BSE048845R1 CI868K01 TB840A 3BSE037760R1
    3BSE043660R1 CI867K01 TU812V1 3BSE013232R1
    3BSE018172R1 SB822 CI801 3BSE022366R1  
    3BSE037760R1 TB840A CI854AK01 3BSE030220R1  
    3BSE013210R1 DI830 PM891K01 3BSE053241R1  
    3BSE008510R1 DO810 PM866K01 3BSE050198R1   
    3BSE061637R1 TB826 PM862K01 3BSE076940R1   
    3BSC610066R1 SD833 DO820 3BSE008514R1 
    3BSC610067R1 SD834 AO810V2 3BSE038415R1   
    3BSC610068R1 SS832 TU810V1 3BSE013230R1   
    3BSE080239R1 NE870 TU811V1 3BSE013231R1  

     

    Payment  & Delivery

    FAQs

    Q1: What is the main difference between RMIO-02C and RMIO-01C?

    The RMIO-02C uses fiber-optic communication to connect with the AINT driver board, providing superior immunity to electromagnetic interference for long-distance signal transmission. The RMIO-01C uses electrical (copper) wiring and is typically used in smaller, lower-power drives in cleaner environments . They are not interchangeable due to different hardware link configurations .

    Q2: Which ABB drive series is the RMIO-02C compatible with?

    The RMIO-02C is designed for ABB ACS800 series drives, including single-drive cabinets (ACS800-01/02/04/07) and multi-drive inverter modules (common DC bus systems). It is the standard control board for large-power and multi-axis ACS800 applications .

    Q3: Is the RMIO-02C still in production or has it been discontinued?

    The RMIO-02C and the broader ACS800 series are now discontinued by ABB, with no new stock available from the original manufacturer . Replacement boards are available through third-party suppliers as refurbished, tested, or used OEM parts. Critical operations should maintain spare buffer stock for maintenance .

    Q4: What are the common symptoms of a failing RMIO-02C board?

    Common failure signs include: drive not powering up (no panel display), fiber-optic communication errors (fault codes FF52, FF53, FF61), erratic motor behavior, loss of I/O response, and frequent fault trips without clear cause . Check fiber-optic connections, the AINT board, and 24V power supply during troubleshooting.

    Q5: Can the RMIO-02C be replaced without reprogramming?

    If the drive's memory module (attached to the RMIO board) is retained and transferred to the replacement board, parameters do not need to be re-entered . However, to ensure full compatibility, always verify the board revision (e.g., Rev C / Rev F) and the complete part number before ordering a replacement.

Hot Tags :

ABB RMIO-02C Original New in Stock

ACS800 Control Board

Fiber-Optic Drive Controller

Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.
Subject : ABB Profibus adapter RMIO-02C Control Board New in Stock

Related Products

  • New and Original ABB UNS 0881 3BHB006338R0001 DCS Module in stock
    New and Original ABB UNS 0881 3BHB006338R0001 DCS Module in stock

    The ABB UNS 0881a-P V1 (3BHB006338R0001) is a Gate Drive Interface (GDI) Board designed for ABB's UNITROL 5000 and UNITROL 6000 static excitation systems . It serves as the critical "last mile" interface between the low-voltage control logic and the high-power thyristor bridge, receiving weak PWM firing pulses from the main control board (COB) and converting them into high-current, optically isolated gate drive signals.

  • New and Original ABB UNS 0880a-P.V1 3BHB005922R0001 Converter Interface Node Board
    New and Original ABB UNS 0880a-P.V1 3BHB005922R0001 Converter Interface Node Board

    The ABB UNS 0880a-P V1 (3BHB005922R0001) is a CIN (Converter Interface Node) Board designed for ABB's UNITROL 5000 excitation systems, ACS6000 medium-voltage drives, and Procontrol P / Bailey DCS platforms. The board performs galvanic isolation, dynamic current sharing regulation, and trigger pulse distribution, ensuring reliable operation in high-power excitation and drive applications.

  • New and Original ABB UNS 0885 3BHB006943R0002 Converter Display Board in Stock
    New and Original ABB UNS 0885 3BHB006943R0002 Converter Display Board in Stock

    The ABB UNS 0885a-Z V2 (3BHB006943R0002) is a Converter Display Board (CDP) designed for the UNITROL 5000 and UN5000 series static excitation systems. It serves as the human-machine interface (HMI) mounted on the rectifier cubicle door, providing operators with real-time visualization of critical parameters including DC voltage, current, frequency, and excitation output.

  • New and Original ABB UNS 0885a-Z.V1 3BHB006943R0001 DCS Module in stock
    New and Original ABB UNS 0885a-Z.V1 3BHB006943R0001 DCS Module in stock

    The part number ABB UNS 0885a-Z V1 (3BHB006943R0001) has a wide range of conflicting descriptions across different sources. Based on the most consistent manufacturer-aligned evidence, it is identified as a Converter Display Board for the UNITROL UN 5000 converter system.

  • New and Original ABB UNS 0017a-P.V1 HIEE305106R0001 DCS Module in stock
    New and Original ABB UNS 0017a-P.V1 HIEE305106R0001 DCS Module in stock

    The ABB UNS 0017a-P V1 (HIEE305106R0001) is a Firing Card (Trigger Board) designed for ABB's UNITROL 6000 X-power static excitation systems and legacy high-power thyristor converter cabinets. The board is engineered for high electromagnetic noise environments typical of power generation and heavy industrial drive applications.

  • New and Original ABB UNS 1860b-P 3BHB001336R0001 Measuring Interface Board in Stock
    New and Original ABB UNS 1860b-P 3BHB001336R0001 Measuring Interface Board in Stock

    The ABB UNS 1860b-P V1 (3BHB001336R0001) is a Measuring Interface Board (MUB) designed for ABB's UNITROL 5000/6000 static excitation systems. The board performs high-precision isolation, filtering, and A/D conversion, converting raw field signals into digital data for the excitation controller (CPU) via the backplane bus.

  • New and Original ABB UNS 0882A-P.V1 3BHB006309R0001 Power Signal Interface in Stock
    New and Original ABB UNS 0882A-P.V1 3BHB006309R0001 Power Signal Interface in Stock

    The ABB UNS 0882A-P V1 (3BHB006309R0001) is a Power Signal Interface (PSI) – Primary unit designed for ABB’s UNITROL 5000 excitation systems and AC 800M / Advant 800xA DCS platforms. It serves as a critical power-and-signal bridge between the incoming 24V DC supply and the rack backplane, performing power filtering, signal isolation, and level conversion to ensure clean, noise-free communication across the control system.

  • New and Original ABB UNS 0881a-P.V1 3BHB006338R0001 Gate Drive Interface Board in Stock
    New and Original ABB UNS 0881a-P.V1 3BHB006338R0001 Gate Drive Interface Board in Stock

    The ABB UNS 0881a-P V1 3BHB006338R0001 is a Gate Drive Interface (GDI) Board designed for ABB's UNITROL 5000 and UNITROL 6000 static excitation systems. Its primary role is to ensure reliable, precisely timed firing of the thyristors that regulate generator excitation current, directly impacting voltage stability and reactive power output.

Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.