Siemens 6SL3130-7TE23-6AA3 SINAMICS S120 Active Line Module

Recommended Models & Related Products

What's Included

• 1 × Siemens 6SL3130-7TE23-6AA3 Active Line Module

• 1 × DRIVE-CLiQ Cable

Note: Active Interface Module (AIM), Control Unit, Motor Modules, and cabinet wiring are sold separately.

Why Buy From Us?

• In Stock – Ready to ship immediately

• Genuine Siemens Product – Factory original component, PM300 Active status

• Warranty Included – Purchase with confidence

• Technical Support – SINAMICS S120 compatibility assistance available

Frequently Asked Questions (FAQ)

Q1: What is the Siemens 6SL3130-7TE23-6AA3?

It is an Active Line Module for the SINAMICS S120 drive system in Booksize format. It is a regulated, four-quadrant line infeed rated at 36 kW that supplies the common DC link and can regenerate energy back to the supply network .

Q2: What is the difference between an Active Line Module and a Smart Line Module?

The Active Line Module actively regulates the DC link voltage and achieves cos φ = 1 in Active Mode, providing the lowest harmonic distortion and reactive power draw. The Smart Line Module provides an unregulated DC link and has a lower power factor (cos φ ≥ 0.96 fundamental, 0.65–0.90 total) . The ALM is preferred for applications requiring the highest power quality and energy efficiency.

Q3: Does this module require an Active Interface Module (AIM)?

Yes. The Active Line Module requires a compatible Active Interface Module for operation. The AIM contains the line reactor and filter components necessary for the ALM’s active regulation and EMC compliance. The AIM is not included and must be ordered separately.

Q4: What is the rated power of this module?

The rated infeed power is 36 kW (40 hp) at 380 V 3 AC. The S6 duty power (40%) is 47 kW, and the maximum power is 70 kW .

Q5: What is the DC link current rating?

The DC link current is 60 A at 600 V DC, with a maximum of 117 A .

Q6: Can this module regenerate energy back to the grid?

Yes. The Active Line Module is a four-quadrant device, meaning it can both draw power from the supply and return regenerative energy from the motor back to the grid during braking .

Q7: What are the dimensions and weight?

Dimensions are 150 mm (W) × 380 mm (H) × 270 mm (D). Net weight is 10.0 kg .

Q8: What is the protection class?

The module is rated IP20 / UL Open Type and is designed for installation in protected cabinets .

Q9: Is this a genuine Siemens product?

Yes. The product lifecycle status is PM300: Active Product, and the country of origin is Germany .

Q10: What should I verify before ordering?

Always verify the exact part number (6SL3130-7TE23-6AA3), confirm that you have the matching Active Interface Module (AIM) for your application, ensure your supply voltage matches (380–480 V AC, 3-phase), and check that your Control Unit (e.g., CU320-2) is compatible with the ALM.