The Siemens 6SL3000-0CE23-6AA0 is a Line Reactor designed for the SINAMICS S120 drive system, specifically matched to the 36 kW Smart Line Module (SLM). It is a mandatory companion component for the Smart Line Module—the SLM cannot operate without the appropriate line reactor.
The reactor is connected between the supply network and the Smart Line Module input. Its primary function is to limit low-frequency line harmonics and reduce current distortion, ensuring the drive system meets power quality requirements and operates stably on the supply network. The SLM is suitable for connection to grounded TN/TT systems and ungrounded IT systems, with DC link precharging handled via integrated precharging resistors.
Item No :
6SL3000-0CE23-6AA0Order(MOQ) :
1Payment :
EXWProduct Origin :
GermanyShipping Port :
Wuhan, Hubei, ChinaLead Time :
3-5 daysWeight :
17kgOverview
6SL3000-0CE23-6AA0 SIMATIC PLC Module
New in stock
Origin from Germany
Payment Method: TT.Western Union
Shipping Method: DHL\UPS\Fedex\EMS\Others
More Brands
| Part Number | Description | Notes |
|---|---|---|
| 6SL3000-0CE23-6AA0 | Line Reactor, 36 kW SLM (this item) | 69 A, 380–480 V |
| 6SL3000-0CE21-6AA0 | Line Reactor, 16 kW SLM | Lower power variant |
| 6SL3000-0CE25-5AA0 | Line Reactor, 55 kW SLM | Higher power variant |
| 6SL3130-7TE23-6AA3 | Smart Line Module, 36 kW | The module this reactor supports |
| 6SL3000-0BE23-6DA1 | Basic Line Filter, 74 A | Companion EMC filter |
1 × Siemens 6SL3000-0CE23-6AA0 Line Reactor
Note: Smart Line Module, line filter, and cabinet wiring are sold separately.
In Stock – Ready to ship immediately
Genuine Siemens Product – Factory original component
Warranty Included – Purchase with confidence
Technical Support – Compatibility assistance available
Q1: What is the Siemens 6SL3000-0CE23-6AA0?
It is a Line Reactor for the SINAMICS S120 drive system, specifically designed for use with the 36 kW Smart Line Module .
Q2: Is this reactor mandatory for the 36 kW Smart Line Module?
Yes. The Smart Line Module cannot operate without the appropriate line reactor. Siemens explicitly warns that using non-approved reactors can cause malfunctions and device destruction .
Q3: What is the rated current of this reactor?
The rated current is 69.0 A .
Q4: What is the input voltage and frequency?
The reactor is rated for 3 AC 380–480 V, 50/60 Hz .
Q5: What are the dimensions and weight?
Dimensions are 225 mm (W) × 235 mm (H) × 224 mm (D). Net weight is 17.0 kg .
Q6: What is the power loss of this reactor?
The power loss is 170 W according to Siemens manual data .
Q7: What conductor cross-section does it accept?
The screw terminals accept up to 35 mm² (2 AWG) conductor cross-section .
Q8: What is the difference between this reactor and a line filter?
A Line Reactor (this item) primarily limits low-frequency harmonics and inrush currents. A Line Filter (such as 6SL3000-0BE23-6DA1) reduces high-frequency conducted emissions for EMC compliance. They serve different purposes and are often used together.
Q9: Is this a genuine Siemens product?
Yes. This is a genuine Siemens SINAMICS S120 component. The product lifecycle status is PM300: Active Product .
Q10: What should I verify before ordering?
Always verify the exact part number (6SL3000-0CE23-6AA0), confirm your Smart Line Module rating (36 kW), and ensure your supply voltage matches (380–480 V AC, 3-phase).
Siemens 6FX3002-5CL11-1AF0 is a pre-assembled MOTION-CONNECT 300 power cable designed for use with SIMOTICS S-1FL6 servo motors and SINAMICS V70/V90 servo drives.
Siemens 6SL3210-5FE11-0UF0 is a SINAMICS V90 servo converter designed for use with SIMOTICS S-1FL6 servo motors. It features a PROFINET communication interface and is suitable for a wide range of motion control tasks.
Siemens 6ES7960-1AA06-0XA0 is a synchronization module (Version 6) designed for the SIMATIC S7-400H fault-tolerant control system. It is used to couple the two central processing units (CPUs) in the redundant setup via fiber-optic patch cables up to 10 meters in length.
Siemens 6EP1332-5BA10 is a SITOP PSU100C power supply module with an input of 120–230 V AC (110–300 V DC) and an output of 24 V DC / 4 A. It belongs to the compact SITOP power supply family, designed for industrial automation applications requiring a reliable 24 V DC power source.
C79451-A3468-B521 is a Siemens spare part, specifically the SO₂ receiver chamber (detector) for the ULTRAMAT 23 gas analyzer.
Siemens C79451-A3468-B206 is the infrared source (also referred to as an IR radiator or projector) designed as a replacement component for the ULTRAMAT 23 series gas analyzers. It serves as the radiation emitter for the infrared measurement channels used to detect gases such as CO, CO₂, NO, SO₂, and CH₄.
C79451-A3494-B16 is a Siemens spare part, specifically an LCD module used in the ULTRAMAT 23 gas analyzer series.
C79451-A3494-D501 is a Siemens spare part, specifically a motherboard (base plate) with firmware for the ULTRAMAT 23 gas analyzer.
Scan to Wechat :
Scan to WhatsApp :
