relay output

The YOKOGAWA ADM55R is a relay output module for the CENTUM CS 3000 / VP distributed control system, classified as a digital output card in Yokogawa's selection guide . It provides isolated relay contact outputs for switching field devices such as valves, contactors, and alarms.

The YOKOGAWA ADR541 is a 16-channel relay output module for the CENTUM CS 3000/VP distributed control system. It provides isolated relay contact outputs for switching DC and AC field loads such as valves, pumps, and alarms.

The YOKOGAWA ADV541 is a 16-channel relay output module for the CENTUM series distributed control system, featuring isolated relay contacts capable of switching both DC and AC loads.

The Pepperl+Fuchs RLK39-54-Z/31/40a/116 is a retroreflective photoelectric sensor with a polarization filter, designed for standard detection applications.

The Honeywell 51309150-175 MC-TDOR22, a 16-channel relay digital output Field Termination Assembly (FTA) for Honeywell TDC 3000 / TPS legacy DCS systems. It is a passive termination component that works in conjunction with the MU-TDOR22 logic board to switch field loads such as solenoids, alarms, and interposing relays.

The Honeywell 51309148-175 MC-TDOR12 is a Digital Relay Output Field Termination Assembly (FTA) for Honeywell TDC 3000, TPS, and Experion PKS distributed control systems. It provides 16 electromechanical relay output channels to interface control system logic with field devices such as solenoids, motors, and indicators.

The Schneider Electric BMXDRA0805 is a discrete relay output module for the Modicon X80 platform (used with M340 and M580 controllers). It provides 8 normally open (NO) relay outputs capable of switching both AC and DC loads, making it suitable for controlling contactors, solenoids, and indicator lights in industrial automation.

The Bently Nevada 125720-02 is the Spare 4-Channel Relay Output Module designed specifically for hazardous area (Class I, Division 2 / Zone 2) and functional safety (SIL) systems within the 3500/32M Relay Module architecture. It is a full-height rear I/O card that works in conjunction with the 149986-02 front relay control module, providing four independent Single-Pole Double-Throw (SPDT) relay outputs for machine protection and emergency shutdown logic.

The KL2784 is an eight-channel relay output terminal from the Beckhoff Bus Terminal series (KL series) for the traditional K-Bus I/O system. It uses electromechanical relays to switch loads that require galvanic isolation or that operate at voltages beyond the standard 24 V DC range, such as 230 V AC actuators, lamps, contactors, and valves. It belongs to the same relay output family as the KL2602, KL2612, KL2622, KL2631, KL2641, KL2652, KL2692, KL2751, and KL2761, with a higher channel count. Unlike EtherCAT terminals (EL series), the KL series communicates via the K-Bus and is typically used with Beckhoff Bus Couplers or Bus Terminal Controllers.

The KL2732 is a two-channel triac output terminal from the Beckhoff Bus Terminal series (KL series) for the traditional K-Bus I/O system, featuring integrated diagnostics. It uses triac semiconductor output stages to switch 230 V AC loads without moving contacts, providing long life, fast switching, and no contact wear, while offering diagnostic feedback on output status. It belongs to the same AC solid-state output family as the KL2701, KL2702, KL2712, and KL2722. Unlike EtherCAT terminals (EL series), the KL series communicates via the K-Bus and is typically used with Beckhoff Bus Couplers or Bus Terminal Controllers.

The KL2722 is a two-channel triac output terminal from the Beckhoff Bus Terminal series (KL series) for the traditional K-Bus I/O system. It uses triac semiconductor output stages to switch 230 V AC loads without moving contacts, providing long life, fast switching, and no contact wear. It is used to switch AC lamps, heaters, valves, and other 230 V AC loads in applications requiring high switching frequency or long service life. It belongs to the same AC solid-state output family as the KL2701, KL2702, and KL2712. Unlike EtherCAT terminals (EL series), the KL series communicates via the K-Bus and is typically used with Beckhoff Bus Couplers or Bus Terminal Controllers.

The KL2712 is a two-channel solid-state relay (SSR) output terminal from the Beckhoff Bus Terminal series (KL series) for the traditional K-Bus I/O system, featuring integrated diagnostics. It uses semiconductor output stages to switch 230 V AC loads without moving contacts, providing long life, fast switching, and no contact wear, while offering diagnostic feedback on output status. It belongs to the same solid-state relay output family as the KL2701 and KL2702. Unlike EtherCAT terminals (EL series), the KL series communicates via the K-Bus and is typically used with Beckhoff Bus Couplers or Bus Terminal Controllers.