Other

The ABB TK503 (1TNE968901R1100) is an original programming cable designed to connect a PC to ABB AC500 programmable logic controllers (PLCs) and related industrial automation equipment. This cable provides a convenient and reliable bridge between a computer's USB port and the RS485 D-Sub 9-pin serial interface commonly found on ABB AC500 CPUs and communication modules. With a length of 3 meters, the TK503 offers sufficient reach for flexible workstation setup and machine-side programming in industrial environments. It is a genuine, high-quality ABB accessory intended for commissioning, programming, firmware updates, and troubleshooting applications. 

The ABB YPK114A (3ASD399002B20) is a critical communication and control board within ABB's industrial automation ecosystem. It serves dual roles depending on the system architecture: as a Drive Communication Board (DCB) providing high-speed, noise-immune fiber optic data exchange, and as a DC Link Control Board managing the power bus in high-power drives. This versatility makes it indispensable in ABB's most demanding applications, including the IRC5 robot controller, ACS6000 series medium-voltage drives, and Symphony DCS systems. Whether used as the "highway" for robot motion data or the "commander" of a drive's power bus, the YPK114A ensures fast, reliable, and deterministic communication between the main controller and the field equipment.

The ABB RTAC-01 (64610805) is a pulse encoder interface module designed specifically for integration with ABB ACS and ACH series variable frequency drives, including the ACS800 family. Its core function is to convert signals from a digital pulse encoder into a format usable by the drive, providing precise motor speed and position feedback for closed-loop control applications.

The ABB PFEA113-65 (3BSE050092R65) is a high-performance tension controller from the PFEA113 series, part of ABB's Web Tension Systems . Its core function is to serve as a dedicated control unit for precise regulation of web, wire, and film tension in industrial processing lines, ensuring consistent material quality and preventing defects during winding and unwinding operation.

The ABB LD810HSEEX (3BSE091722R1) is an explosion-proof FOUNDATION Fieldbus (FF) linking device designed for ABB System 800xA distributed control systems . Its core function is to serve as a high-speed Ethernet (HSE) gateway, connecting up to four independent FF-H1 fieldbus segments to the control network. It enables bidirectional data exchange, diagnostics, and asset management for field instruments in hazardous areas, supporting real-time data transfer and cross-link data republishing between H1 segments and the HSE subnet.

The ABB LD800HSE (3BDH000320R02) is a FOUNDATION Fieldbus (FF) linking device for ABB Advant OCS and System 800xA distributed control systems . Its core function is to serve as a gateway between up to four FF H1 fieldbus segments and a high-speed Ethernet (HSE) subnet, enabling seamless integration of FOUNDATION Fieldbus devices into the control system architecture.

The ABB DSDI110AV1 (3BSE018295R1) is a digital input board designed for ABB Advant OCS and System 800xA, compatible with S100 I/O systems . Its core function is to collect 24V DC discrete signals from field devices—such as limit switches, pushbuttons, and relay contacts—and convert them into logic states for the controller. It represents an upgraded version of the older DSDI110 and DSDI110A modules.

The ABB CI930F (3BDH001010R0002) is a PROFIBUS DP master communication interface module for the Freelance AC 900F distributed control system (DCS). Its core function is to serve as the primary gateway for connecting the AC 900F controller to PROFIBUS DP field devices, such as remote I/O, drives, and transmitters, enabling real-time data exchange and control.

The ABB PM904F (3BDH001002R0001) is a high-performance central processing unit (CPU) module for the Freelance AC 900F distributed control system (DCS) . Its core function is to serve as the control system's primary processing engine, executing complex automation logic, managing communication with field I/O and higher-level systems, and enabling scalable control for mid-to-large industrial processes.

The ABB PM802F (3BDH000002R1) is a high-performance process controller base unit designed for the Freelance AC 800F Distributed Control System (DCS). Its core function is to serve as the central processing unit for medium-to-large automation projects, executing complex logic, regulatory control, and sequence management for critical industrial processes.

The ABB EI813F (3BDH000022R1) is a 10BaseT Ethernet communication module designed for the ABB Freelance AC 800F distributed control system (DCS). Its core function is to provide a high-speed network interface for the AC 800F controller, enabling data exchange between the control unit, operator stations, and higher-level SCADA/MES systems. It can also serve as a redundancy link to enhance system availability.

The ABB EI803F (3BDH000017R1) is a high-performance Ethernet communication module designed for ABB AC 800F and Advant distributed control systems (DCS). Its core function is to provide a 10BaseT Ethernet interface, enabling high-speed data exchange between the control unit, operator stations, and upper-level SCADA/MES systems . By supporting multiple industrial protocols, it serves as a critical communication bridge for both new system deployments and legacy network expansions.